Buy Leather industry chemicals | Leather chemicals manufacturers | suppliers | leather binders | dyes - Worldofchemicals


Primary Amyl Acetate

Primary Amyl Acetate is derived mixture of 1-pentyl acetate and 2-methyl-1-butyl acetate. It is a non hazardous air pollutant solvent with good resin solvency for low formulation viscosity and high electrical resistivity for electrostatically sprayed coatingselectrical resistivity for electrostatically sprayed coatings.

Sorapret Booster XLR

Sorapret Booster XLR is a polisocianate based crosslinker.

Properties Suppliers
Soy Protein Isolated

Soy protein isolate is a highly refined or purified form of soy protein with a minimum protein content of 90% on a moisture-free basis. It is made from defatted soy flour which has had most of the non-protein components, fats and carbohydrates removed. Because of this, it has a neutral flavor and will cause less flatulence due to bacterial fermentation.

Properties Suppliers

VECOSOL BINDER U 010 is a very soft water based aromatic polyurethane resin, developed to promote good adhesion not only on the leather, but also between the different coating layers. Levelling, together with absorbing power are excellent with every kind of leather, avoiding also leather stiffening. It gives also a fine break on full grain leathers. It develops good water resistance. It can be added as soft adhesion binder to liquid dyes to enhance colour brilliance, as it is not necessary to add big quantities of solvents or penetrating agents. It can be also diluted in water-miscible solvents and in some organic solvents.

Properties Suppliers

VECOSOL BINDER U 315 is a soft polyurethane binder, especially developed for garment leather. It gives to the leather softness and fullness with excellent adhesion and water resistance. After milling, the leather keeps a very natural aspect. As it is a very soft binder, it can be used together with other resins and auxiliaries.

Properties Suppliers

VECOSOL BINDER U 509 is a medium-soft polyurethane binder, which is suitable as main binder for water based full grain coverings and top coats. Its properties are it is water, solvent and heat resistance and these properties are improved by proper cross-linking. It has high flexible characteristics for good embossing and dry milling properties. The finished leather keeps a very natural grain aspect.

Properties Suppliers

trans-Crotonaldehyde is used as a chemical intermediate in the manufacture of a variety of chemicals, solvent, fuel-gas warning agent, alcohol denaturant, leather tanning agent, also used in locating breaks and leaks in pipes.

Properties Suppliers
Chromium(III) Sulfate

Chromium(III) sulfate is an inorganic compound. It is widely used in the tanning of leather.

Properties Suppliers
Isobutyl Methacrylate

Isobutyl Methacrylate is a base material for coatings and adhesives. It is used in resins, solvent, coatings, adhesives, oil additives, dental products, textile emulsions, leather and paper finishing.

Properties Suppliers

N,N-Dimethylformamide is used as a solvent with low evaporation rate.It is used in the production of acrylic fibers and plastics. It is also used as a solvent in peptide coupling for pharmaceuticals, in the development and production of pesticides, and in the manufacture of adhesives, synthetic leathers, fibers, films, and surface coatings.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X