Levelling Agents neutralize electrostatic attraction between textile dyes

chemical-categories

ABROLAV-ADR

ABROLAV-ADR is an anionic leveling agent for reactive dyes.

Properties Suppliers
ABROLAV-RDL

ABROLAV-RDL is an anionic Dispersing cum leveling agent for reactive dyes.

Properties Suppliers
ADDITOL

ADDITOL leveling agent gives smoother films with fewer imperfections and better appearance compared to unmodified coatings. It acts as a necessary ingredient in many modern surface coating formulations. It improve flow and leveling, eliminate craters and fisheyes, reduce orange peel and pinholes, enhance substrate wetting, facilitate air and volatile release, aid in pigment dispersion, maintain substrate and recoat adhesion, improve slip, and therefore, mar resistance. ADDITOL products are silicone based for particularly difficult substrate wetting problems.

Properties Suppliers
ARDEX A 55

ARDEX A 55 is an advanced sub-floor smoothing and patching compound with rapid hardening and rapid drying properties and is specifically designed for areas where speed is essential for rapid renovation and repair work prior to receiving floor finishes.It is used in conjunction with either ARDEX P 82 or ARDEX P 51 primers for specific sub-floors.ARDEX A 55 can be applied to existing hard bases e.g. terrazzo, screeds, concrete, ceramictiles, primed anhydrite screeds.ARDEX A 55 is especially useful where the installation time of floor finishes must be kept to a minimum.

Properties Suppliers
ARDEX FA 20

ARDEX FA 20 is an advanced fibre reinforced smoothing and levelling compound featuring MICROTEC technology that is designed to rapidly smooth and level existing substrates prior to applying a floor finish. ARDEX FA 20 can be applied to timber floors, flooring grade asphalt and existing substrates with adhesive residues. ARDEX FA 20 can be applied on all common sub-floors such as concrete, cement/sand screeds, flooring grade asphalt, timber and chipboard, quarry tiles, existing sub-floors with sound adhesive residues. ARDEX FA 20 may also be used for smoothing and levelling timber floors prior to applying ceramic tiles.

Properties Suppliers
ARDEX FLOOR LEVEL

Ardex Floor Level is a free flowing levelling compound designed for levelling and smoothing a wide range of sub-floor types including cement/sand screeds, gypsum screeds and concrete prior to applying floor tiles. It is useful when fixing large format floor tiles which require a very flat sub-floor. Ardex Floor Level contains high quality synthetic resins, special cements and selected fillers so that when mixed with water, a fluid, easily trowelled mortar is produced. Ardex Floor Level will help level and smooth in a single application uneven internal sub-floors such as concrete, cement/sand screeds, gypsum screeds.

Properties Suppliers
ARDEX K 11

ARDEX K 11 is a free flowing application levelling and smoothing compound designed for levelling and smoothing a wide range of subfloor types including cements and screeds, gypsum screeds and concrete. ARDEX K11contains high quality synthetic resins.ARDEX K 11 can be applied by pump up to a thickness of 10mm.ARDEX K 11 contains a reducing agent to control the level of Chromium VI.

Properties Suppliers
ARDEX K 13

ARDEX K 13 is specially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as cement and sands creeds, concrete. ARDEX K 13 contains high quality synthetic resins. ARDEX K 13 can be applied from a feather edge up to a maximum of 5mm in a single application. ARDEX K 13 contains a reducing agent to control the level of Chromium VI when mixed prior to use.

Properties Suppliers
ARDEX K 15 NEW

ARDEX K 15 NEW is an advanced sub-floor smoothing compound. It is virtually tension free and is designed to rapidly level and smooth hard sub-floors prior to applying most types of floor finishes. ARDEX K 15 NEW is a grey powder consisting of special cements and high quality synthetic resins. ARDEX K 15 NEW is especially useful where the installation time of the floor finish must be kept to a minimum. ARDEX K 15 NEW will level and smooth, internal sub-floors of concrete, cement/sand screeds, quarry tiles. ARDEX K 15 NEW should be applied at thicknesses greater than 1.5mm to benefit from its self-levelling properties.

Properties Suppliers
ARDEX K 15-HB

ARDEX K15-HB is an advanced and versatile high build levelling compound designed for applications from 5mm up to a maximum of 35mm. It is virtually tension free and is designed to rapidly level uneven, hard sub-floors. It is used in conjunction with either ARDEX P 82, ARDEX P51 or ARDEX P 4 primers, ARDEX K15-HB can be applied to old sub-floors.ARDEX K15-HB is a grey powder consisting of special cements, graded aggregates and high quality synthetic resins.ARDEX K15-HB is especially useful where the installation time of the floor finish must be kept to a minimum.

Properties Suppliers

12345...13