Membrane process – Buy membrane chemicals, membrane filters, membrane cleaning chemicals

chemical-categories

AWC-A-102 PLUS

AWC A-102 PLUS is a broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.It effectively inhibits formation of calcium sulfate, calcium phosphate, calcium fluoride, barium sulfate, strontium sulfate and silica.

Properties Suppliers
Aquacare A-111

Aquacare A-111 is a liquid polyacrylate- based antiscalant used to inhibit inorganic scale formation in membrane separation processes.It controls Calcium Carbonate, Calcium Sulphate, Barium and Strontium Sulphates, as well as Silica scales in waters with a high fouling potential.

Properties Suppliers
Aquacare-A-101

Aquacare-A-101 is a broad spectrum antiscalant designed to inhibit formation of inorganic scales in membrane separation processes.It stops crystal growth of calcium sulfate scale.Aquacare-A-101 is highly effective on R.O. feed water having a high calcium sulfate scaling potential.It often surpasses the performance of other antiscalants under stressed conditions of high pH.Aquacare-A-101 effectively stabilizes metal ions to prevent fouling of the membrane.

Properties Suppliers
Aquacare-A-102Fe

Aquacare-A-102Fe is used to inhibit inorganic scale formation in membrane separation processes.It prevents Calcium Phosphate scale formation.

Properties Suppliers
Clean Tace 8204

Clean Tace 8204 is low foaming cleaning solution formulated to remove silt & organic foulants such as Colloidal silica, Clay, Organic color & Bacterial slime from thin film composite membranes. Clean Tace 8204 is well formulated buffered solution which prevents the pH limits of a membrane being exceeded in the event of misapplication. Clean Tace 8204 should not be used on cellulose acetate membranes, as irreversible damage can occur.

Properties Suppliers
Clean Tace 8205

Clean Tace 8205 has been developed for the cleaning of reverse osmosis, nano-filtration and ultra-filtration membranes. Its formulation is based on an anionic surfactant and is most effective in removing colloidal and other organic matter.

Properties Suppliers
GRAMICID-121

Gramicid-121(Alkaline Base Descalent): specially used as an alkaline base cleaner for RO membrane. It is effective in the pH range of 10-13.

Gramicid-121 works as an alkaline base cleaner for RO membrane. It is specially formulated blend of cleaners for removal of carbonate, metal oxide and sulfate scales of Barium, Strontium and Calcium in reverse osmosis systems.Gramicid – 121 effectively removes these barium scales and also sulfate scales of Strontium and Calcium. It also remove organic and dead biological matter.

Properties Suppliers
GRAMICID-122

Gramicid-122(Acid Base Desclent): works as an acid base cleaner for RO membrane. effective in the pH range of 1-2.

Gramicid-122 works as an acid base cleaner for  RO membrane. It .is a specially formulated blend of cleaners for the effective removal of carbonate, metal Hydroxides and sulfate scales of Barium, Strontium and Calcium in reverse osmosis systems. It is a low pH liquid formulation to remove calcium carbonate, metal hydroxides & sulfate scales of calcium, barium and strontium.

Properties Suppliers
Genesys CAS

Genesys CAS has been developed as an antiscalant for use in Reverse Osmosis and Nano-Filtration systems operating with feed-waters containing high levels of Calcium sulphate. Genesys CAS is also effective against Calcium carbonate and other commonly found scaling species. The strong threshold properties shown by Genesys CAS against Calcium sulphate and Calcium carbonate enable membrane systems to be operated at their optimum recovery rate. This reduces the amount of feed water needed and the volume of concentrate requiring disposal.

Properties Suppliers
Genesys LF

Genesys LF is a general purpose liquid antiscalant & antifoulant for use in Reverse Osmosis and Nanofiltration systems. This concentrated phosphonate product is effective against a wide range of inorganic scaling species and also sequesters trivalent metal cations such as iron, manganese and aluminium thus reducing the frequency of membrane replacement and cleaning. Genesys LF has proven to be effective at a Langelier Saturation Index (LSI) of +2.6 which means that systems can be designed and operated at their optimum recovery rates. Genesys LF should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2 – 4 mg/L.Genesys LF may also be used in sea water applications where iron is present, recycle of brine is in use or there is no feed water pH reduction by acid dosing. Genesys LF is an aqueous solution of neutralised phosphonic acid. It has been approved for use in potable water applications and does not contribute to assimilable organic carbon (AOC), which can act as source of nutrient for micro-organisms. Genesys LF is compatible with carbon steel and other commonly used materials of construction.

Properties Suppliers

12345...6