Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Hydrex 4711 is a liquid product, based upon alkalis and sequestering compounds for the removal of organic foulants and silica from polypropylene membranes. The product is particularly suitable for use where foaming is undesirable.
Hydrex 4713 is a formulated product designed to be used for the removal of deposits from polypropylene membranes.The product is strongly alkaline and also contains chelants, wetting agents and other compounds to enhance the cleaning process.
Hydrex 4714 removes biological and other organic foulants from membrane water treatment systems.It extremely effective for the sanitization of RO membranes and suitable for sanitizing of RO system producing potable water.
Hydrex 4715 is powder based upon sodium metabisulphite and is designed for use as a preservative for membranes.It may also be used as a mild sterilant.
Swemcare INL solutions should be made up with chlorine free water to give a 3- 4% in proportion to total volume of the cleaning system (Including the volume of the pressure vessel and pipe lines) Circulate the prepared solution at the following flow rate or as recommended by the membrane manufacturer depending on the membrane size for at least for 1hr.
Swemcare OGL solutions should be made up with chlorine free water to give a 3-4% in proportion to total volume of the cleaning system (Including the volume of the pressure vessel and pipe lines) Circulate the prepared solution by maintaining the pH 11.0-11.5 at the following flow rate or as recommended by the membrane manufacturer depending on the membrane size for at least for an hour. It may be necessary to soak the membranes with Swemcare OGL for 4-6 hours or longer for heavily fouled membranes.
Hydrex® 4706 is a liquid product.It is a product designed for dilution with sodium hydroxide for use in the removal oforganic foulants and silica deposits from polypropylene membranes.The formulation contains wetting agents and other compounds to enhance the activity as a cleaning agent.
AWC A-102 PLUS is a broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.It effectively inhibits formation of calcium sulfate, calcium phosphate, calcium fluoride, barium sulfate, strontium sulfate and silica.
Aquacare A-111 is a liquid polyacrylate- based antiscalant used to inhibit inorganic scale formation in membrane separation processes.It controls Calcium Carbonate, Calcium Sulphate, Barium and Strontium Sulphates, as well as Silica scales in waters with a high fouling potential.
Aquacare-A-101 is a broad spectrum antiscalant designed to inhibit formation of inorganic scales in membrane separation processes.It stops crystal growth of calcium sulfate scale.Aquacare-A-101 is highly effective on R.O. feed water having a high calcium sulfate scaling potential.It often surpasses the performance of other antiscalants under stressed conditions of high pH.Aquacare-A-101 effectively stabilizes metal ions to prevent fouling of the membrane.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder