Buy mining chemicals | mining chemicals manufacturers | mining chemicals suppliers - Worldofchemicals


Danafloat 070

Danafloat 070 is an aryl dithiophosphoric acid. It has strong frothing properties. It is a quite powerful collector and especially in acid or neutral circuits a non-selective product for all sulphides. In alkaline environments, Danafloat 070 is useful for the flotation of copper, silver, gold, lead and zinc sulphides, as in general it does not float pyrite at high pH. Many operators have found that Danafloat 070 together with an alkyl dithiophosphate or a xanthate are the best combinations for optimum grade and recovery. Because of the limited water solubility, it should be added to the grinding circuit or the conditioner. The dosage of Danafloat 070 is wide and varies with the type of ore, usually falling within the range of 10 to 100 grams per metric ton ore. It should be used undiluted.

Properties Suppliers
Danafloat 123

Danafloat 123 is useful as a rougher collector producing a high grade first concentrate. For optimum recovery a scavenger collector, e.g. a stronger dithiophosphate or a xanthate in conjunction with Danafloat 123 is used. It is very selective towards pyrite and other iron sulphides and is therefore used in the flotation of copper sulphide mineral and Cu-activated sphalerite, particularly in the presence of pyrite. It does not float lead sulphide. The collector being a selective reagent is applicable on easy floating liberated copper sulphide like Skim-Air flotation in the grinding circuit. It can be added undiluted or preferably diluted with clear water to 5-20% solutions to better control the dosage. The dosage of Danafloat 123 varies with the type of ore, usually falling within the range of 20 to 100 grams per metric ton ore. It is effective in the pH range of 4 to 12. Because of its selectivity against iron sulphides, Danafloat 123 can be used at lower alkalinity than xanthates.

Properties Suppliers
Danafloat 233

Danafloat 233 is an aqueous solution of dialkyl dithiophosphate. It has little frothing properties. The main application is the flotation of zinc sulphides, e.g. sphalerite and marmatite, where the selectivity of Danafloat 233 towards pyrite is advantageous. Another application is flotation of copper sulphides. In both cases, for optimum recovery a scavenger collector is often needed. It can be added undiluted or preferably diluted with clear water to 5-20% solutions. It is good practice to stir before use. The dosage of Danafloat 233 varies with the type of ore, usually falling within the range of 10-100 grams per metric ton ore.

Properties Suppliers

Ferrotitanium is a ferroalloy, an alloy of iron and titanium with between 10–20 and 45–75% titanium and sometimes a small amount of carbon. It is used in steelmaking as a cleansing agent for iron and steel.Ferrotitanium can be manufactured by mixing titanium sponge and scrap with iron and melting them together in an induction furnace. Ferrotitanium powder can be also used as a fuel in some pyrotechnic compositions.Ferrotitanium can be used as additive for making special steel & flux-cored wire,in fabrication of Aerospace Vehicles and Aircrafts both military and commercial,in Steel and Stainless Steel Processing units.

Properties Suppliers
Flomin C 5439

Flomin C 5439 is a special blend of DTP/Thionocarbamate used in Gold/Copper sulfide flotation.

Properties Suppliers
Flomin C 7931

Flomin C 7931 is in high demand for Gold/Copper sulfide flotation with high oxide and clay content.

Properties Suppliers
Florrea D-109

Florrea D-109 is used alone, or in combination with cyanide, for depression of Zn minerals in the flotation of Pb/Zn, Cu/Zn, and Cu/Pb/Zn ores; depression on talc in by-product molybdenum circuit.

Properties Suppliers
Florrea D-119

Florrea D-119 is widely used in mineral flotation as depressant, dispersant and as controlling agent of some soluble ions.

Properties Suppliers
Guartec EW-5C

Guartec EW-5C is a metallurgical grade, guar based smoothing agent designed for use in copper electrowinning.

Meca Flock-25

Meca Flock-25 is a high molecular weightflocculant of polyacrylamide type. It is usedas clarification and filtration agent of riverwater, waste water and industrial water. It has wide application in process treatment of mining, metal & ceramics. Meca Flock-25 shows good flocculation effects with a very little dosage.

Properties Suppliers

1...910111213...21 uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X