Petroleum Industry Chemicals | Petroleum Chemicals Manufacturers | Petrochemicals

chemical-categories

SOL CMC HV

SOL CMC HV is high viscosity oilfield chemical product and it is free from extraneous impurities. It is widely available low cost polymer providing viscosity for fluid loss control and cost effective provider for filtration control in water based drilling fluids.

Properties Suppliers
SOL CMC LV

SOL CMC LV low viscosity oilfield chemical product and it is free from extraneous impurities. It is widely available low cost polymer providing viscosity for fluid loss control and cost effective provider for filtration control in water based drilling fluids.

Properties Suppliers
SOLPHALT L

SOLPHALT L is liquid sulfonated asphalt used to stabilize shale formations, increase lubricity, and lower water loss. It can be used in most water-based and all oil-based and synthetic mud systems.

Properties
SYLVABLEND

SYLVABLEND products are suitable raw materials for the production of cutting, drilling and lubricant oils and also for linoleum binders.

Properties Suppliers
Tandex 845

Tandex 845 is used in the concentrated form and sprayed directly onto the spillarea. Once treated, the area can then be agitated with a fire hose.

Properties Suppliers
UNIDYME 60

UNIDYME 60 is a trimer fatty acids product with typical trimer content of approximately 55% by gas chromatography. It is product is suitable for use as a corrosion inhibitor for oilfield applications, flexibilizer in epoxy compounds and polyamides.

Properties Suppliers
VANLUBE EZ

VANLUBE EZ is a concentrated version of VANLUBE AZ that contains no diluent oil. It is a clear, light-colored, and free-flowing liquid. VANLUBE EZ is recommended for use in greases and industrial lubricants. Recommended treatment levels are 0.1 to 2.0 mass percent.

Properties Suppliers
AMTECH 1100

AMTECH 1100 Scale inhibitors are surface-active negatively charged polymers. As minerals exceed their solubility’s and begin to merge, the polymers become attached. The structure for crystallisation is disrupted and the formation of scale is prevented. The particles of scale combined with the inhibitor will than be dispersed and remain in suspension.

Properties Suppliers
AMTECH 4000

AMTECH 4000 Separate hydrocarbon sludge to recover oil, discharge water to DOE standards and debris as a conservation and value adding initiative. Sludge is produced from the treatment of wastewater in on-site (e.g. septic tank) and off-site (e.g. activated sludge) systems.This is inherently so because a primary aim of wastewater treatment is removing solids from the wastewater.In addition, soluble organic substances are converted to bacterial cells, and the latter is removed from the wastewater.

Properties Suppliers
AMTECH 5000

AMTECH 5000 Biocides are used to kill bacteria in fluids that come into contact with hydrocarbon reservoirs and thus prevent their biological contamination.

Properties Suppliers

1...910111213...37
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X