Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
ENVIROSPEC 1510 is a non-toxic, biodegradable, water soluble, high solids, combination long chain aliphatic phosphate ester and polyglycol monoester additive for spotting fluids. It will quickly penetrate into the wall cake, incorporating the existing water into the spotting fluid, and at the same time, coats the native or commercial clays to eliminate further water absorption, and will cause partial dehydration of the wall cake. ENVIROSPEC 1510 will contribute good lubricity and EP properties.
Linalyl acetate is one of the principal components of the essential oils of lavender and bergamot. It is the acetate ester of linalool, and the two often occur in conjunction. It is sometimes used as an adulterant in essential oils to make them more marketable.
MICROBE TREAT-L assists in keeping drains, traps and lines clean and clog free. MICROBE TREAT-L is pH neutral, performs within a pH range of 5.5 to 8.5 and is not harmful to system pipes or equipment. MICROBE TREAT-L will help maintain the all types of sanitation devices, collection units, holding and transfer systems, or other types of holding tanks in optimum operational condition. When used as a cleaner, about 100 ml of product should be applied to each bowl, sink, and drain in the same manner as with any janitorial type cleaner.
Methyl acrylate is a volatile alpha beta unsubstituted methyl ester used in the preparation of polyamidoamine (PAMAM) dendrimers typically by Michael addition with a primary amine. Methyl acrylate is a contact allergen present in nail lacquer. It can be used as a co-polymer in the process of polymerisation of poly anionic cellulose (PAC) polymers, to reduce the glass transition temperature of the PAC polymers. Methyl acrylate is reagent used in the synthesis of remi-fentanil.
Methyl chloride is a chemical compound of the group of haloalkanes. It was first synthesized by the French chemists Jean-Baptiste Dumas and Eugene Peligot in 1835 by boiling a mixture of methanol, sulfuric acid, and sodium chloride. It was a widely used refrigerant, but its use has been discontinued due to its toxicity and flammability. It was also once used for producing lead-based gasoline additives. The most important use of methyl chloride today is as a chemical intermediate in the production of silicone polymers. Smaller quantities are used as a solvent in the manufacture of butyl rubber and in petroleum refining. It is also used in a variety of other fields: as an extractant for greases, oils and resins, as a propellant and blowing agent in polystyrene foam production, as a local anesthetic, as an intermediate in drug manufacturing, as a catalyst carrier in low-temperature polymerization, as a fluid for thermometric and thermostatic equipment, and as a herbicide.
PCHEM PPD - 100 is a crystal modifier that is formulated to improve the flow in systems transporting heavy fuel oils by lowering the pour point, thereby improving the cold flow characteristics. It can be applied to crude oils, residual oils, and cat cracker feeds.
PCHEM PPD - 101 is a crystal modifier that is formulated to improve flow in systems transporting heavy fuel oils by lowering the pour point, thereby improving the cold flow properties. It improves oil quality in fuels such as crude oil, residual fuel oil, cat cracker feeds and reduced crudes. It is dependent on the fuel to be treated and the desired pour point.
PCHEM PPD - 102 is a crystal modifier that is formulated to improve flow in systems transporting heavy fuel oils by lowering the pour point and thereby improving the cold flow properties. It improves the oil quality of fuels such as crude oil, residual fuel oil, cat cracker feeds and reduced crudes.
PCHEM PPD - 105 is a crystal modifier that is formulated to improve flow in systems transporting heavy fuel oils by lowering the pour point, thereby improving the cold flow characteristics. It can be applied to crude oils, residual oils, and cat cracker feeds.
PCHEM PPD - 300 is a low temperature flow improver and pour point depressant for middle distillate fuels and heating oils. It will not adversely affect combustion or water haze stabilization and does not contribute to corrosiveness. It contains no metals, halogens or sulphur compounds. It is intended function is modification of wax crystal formation at low temperatures to depress the cloud and pour point and improve the cold flow properties of a wide range of distillate fuels. It is designed to address problems such as shutdown or inability to start diesel engines or furnaces, lost productivity due to prolonged fuel loading or unloading times, downgrading of kerosene as a cutter stock and when optimizing fuel yields from crude oil leave limited options in component selection and refining.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder