Petroleum Industry Chemicals | Petroleum Chemicals Manufacturers | Petrochemicals

chemical-categories

C-613

C-613 is a specially formulated corrosion inhibitor for use in Glycol dehydration systems. C-613 incorporates an effective corrosion inhibitor system with a pH buffering additive that maintains the pH of the glycol system at 7-9 thus minimizing corrosion from acid gases such as H2S and CO2. C-613 is normally added to the glycol system based on laboratory titration data.

Properties Suppliers
C-9 Petroleum Resin

C-9 Petroleum Resins is a kind of thermal plasticizing resin produced by C5, C9 fraction, by-products of petroleum cracking, through pretreatment, polymerization and distillation. It is not a high polymer but a low polymer with the molecular weight between 300-3000.It has the chemical stabilizing property to acid and alkaline, viscosity adjusting and thermal stabilizing.C-9 Petroleum Resins are not used independently, but have to be used together with other kinds of resins as promoters, adjusting agents and modifiers.C-9 Petroleum Resins are used in paint to increase brightness, adhesive force, film hardness, acid resistance and alkali resistance, in adhesive to increase adhesiveness, resistance to acid, alkaline and water, in rubber compounding to used as takifier, reinforcer, extender, and lower moony viscosity of compounds, In printing Inks for color spreading, fast drying, and brightening effect. It is a granular solid with color from light yellow to brown. It has the properties of good solubility, indissolubility, water resistance, insulation and very good chemical stability over acid and alkali. It can be substitute for rosin, synthetic, hot melt adhesive and even suitable for other modified resin.

Properties Suppliers
C9 Aromatic Hydrocarbon Solvent

C9 Aromatic Hydrocarbon Solvent is a mixture of aromatic hydrocarbons comprised of C9 aromatic hydrocarbons with high solvency and high flash point.C9 Aromatic Hydrocarbon Solvent widely used in emulsifiers, surfactants, disinfectants, agrochemicals,water treatment chemicals,paint and coatings,oilfield chemicals,foundry chemicals

Properties Suppliers
C9 Resinfeed

Resin Feed is a mixture of (mainly unsaturated) C9 and C10 components rich in indene and vinyltoluenes. It originates from the high temperature cracking of petroleum fractions and is distilled out of pyrolysis gasoline (pygas) during the production of benzene

Properties Suppliers
CA-FL7

CA-FL7 is used as a organic polymer fluid loss agent/retarder.

Properties Suppliers
CARADOL

CARADOL polyether polyols are derived from propylene oxide. They are organic materials with two or more alcohol end-groups (OH) and sometimes with micrometer polymer particles present in suspension. When polyether polyols and isocyanates are reacted together they form polyurethanes.

Properties Suppliers
CARBOBEADS

CARBOBEADS are low density, carbon based spheres, which provide a beneficial boundary layer and friction protection through the formation. CARBOBEADS may be used to increase slide rates when making angle corrections in horizontal drilling operations.

Properties Suppliers
CELLOSIZE Hydroxyethyl Cellulose

CELLOSIZE Hydroxyethyl Cellulose is a nonionic, water-soluble polymer that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily soluble in hot or cold water and can be used to prepare solutions with a wide range of viscosities. It has outstanding tolerance for dissolved electrolytes. It is a viscosifier in workover and completion fluids. It helps provide clear, low-solid fluids that impart minimum formation damage. As a thickener for spray emulsions, CELLOSIZE Hydroxyethyl Cellulose reduces drift and permits more efficient spray directly on foliage. It is an effective film-former, binder, thickener, stabilizer, and dispersant in shampoos, hair sprays, neutralizers, creams and lotions. CELLOSIZE Hydroxyethyl Cellulose is a useful gloss and ink hold-out size for paper and paperboard.

Properties Suppliers
CHEMSOL CMC

CHEMSOL CMC is a water soluble polymer made from cellulose through chemical modification. It used in conjunction with Bentonite where low-solids muds are desired.

Properties Suppliers
CHEMSOL HEC L

CHEMSOL HEC L polymer is a non-ionic high molecular weight hydroxyl ethyl cellulose (HEC) designed specifically to enhance the rheological properties of water-based and polyvalent brine fluids. It is used in the work-over fluids, special applications in fracturing fluids.

Properties Suppliers

1...45678...35