Buy paint additives, chemicals | paint additives manufacturers | paint additives suppliers } Worldofchemicals

chemical-categories

Nubirox 106

Nubirox 106 is a white anticorrosive pigment with high performance features, high compatibility and maximum efficiency. Excellent performance in waterborne system. It is recommended for coil coating.

Properties Suppliers
Nubirox 213

Nubirox 213 is a beige anticorrosive pigment with high performance features and high compatibility good performance in alkyd and epoxy-polyamide systems.

Properties Suppliers
Nubirox 215

Nubirox 215 is a beige anticorrosive basic pigment with high reactivity and high performance features. Good performance in alkyd and epoxy-polyamide systems.

Properties Suppliers
Nubirox 301

Nubirox 301 is a zinc free product for replacing zinc based anticorrosive pigment.

Properties Suppliers
Nubirox 302

Nubirox 302 is a zinc free product. The surface organic treatment improves the wetting properties, widens the binders compatibility and enhances its performance.

Properties Suppliers
Nychem 1552

Nychem 1552 is one of our Medium Nitrile Emulsion offerings. This line features a combination of very good oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. Toughness, abrasion resistance and chemical resistance can be further enhanced though either vulcanization or by adding external crosslinking agents such as melamines, epoxies, phenolics or metal complexes. Nychem 1552 is a high solids noncarboxylated butadiene acrylonitrile copolymer latex that is stabilized with natural surfactants so it exhibits excellent water and alkali resistance and, if desired, can be easily destabilized. Nychem 1552 has good compatibility with polyvinyl chloride dispersions and good heat and light aging. It is approved for use under FDA regulations 175.105 (adhesives) and 177.2600 (rubber articles). Common applications include paper saturation, adhesives and abrasives.

Properties
Nychem 1572

Nychem 1572 is one of our Medium Nitrile Emulsion offerings. This line features a combination of very good oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. Toughness, abrasion resistance and chemical resistance can be further enhanced though either vulcanization or by adding external crosslinking agents such as melamines, epoxies, phenolics or metal complexes. Nychem 1572 is a high solids reactive carboxylated butadiene acrylonitrile polymer latex that is stabilized with synthetic surfactants so it exhibits superior mechanical stability. It is approved for use under FDA regulations 175.105 (adhesives) and 177.2600 (rubber articles). Nychem 1572’s applications include paper saturation, abrasives, leather finishing, nonwoven binders and tape release coatings.

Properties
Nychem 1581

Nychem 1581 is one of our Specialty offerings. It is a carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination of excellent oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. Toughness, abrasion resistance and chemical resistance can be further enhanced though either vulcanization or by adding external crosslinking agents such as melamines, epoxies, phenolics or metal complexes. Nychem 1581 is stabilized with synthetic surfactants so it exhibits superior mechanical stability. It also has good compatibility with phenolic resins. Nychem 1581’s applications include paper saturation, abrasives, adhesives, nonwoven binders and textile coatings.

Properties
Patcote 519

Patcote 519 is a specialty defoamer formulated for difficult systems where foam is enhanced by high-foaming acrylics. It is used in industrial coatings, architectural paints etc.

Properties Suppliers
Polyaniline

Polyaniline is a conducting polymer of the semi-flexible rod polymer.It is usually found folded with other polymers.Polyaniline comes in a granular form which can be mixed with an organic chemical and painted or sprayed onto a substance to form a smooth layer of polyaniline. It can also be molded into various shapes.It is made by polymerizing aniline molecules through a chemical reaction with a substance such as hydrochloric acid.It is used in antistatics, charge dissipation or electrostatic dispersive coatings and blends, electromagnetic interference shielding ,anti-corrosive coatings, hole injection layers,transparent conductors, ITO replacements, actuators, chemical vapor and solution based sensors, electrochromic coatings.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X