Buy paint additives, chemicals | paint additives manufacturers | paint additives suppliers } Worldofchemicals

chemical-categories

Carbo e-Therm

Carbo e-Therm is a high-efficiency, electrically heated coating developed for use in the nonhazardous low-voltage range.Carbo e-Therm is suitable for temperatures up to approx. 500°C. Its excellent applicability to very different geometries and surfaces plus high heating power open up a wide field of possible uses.

Properties Suppliers
CarboCond

CarboBond is especially suitable for the kind of adhesive application where electrical conductivity is of primary importance.

Properties Suppliers
CarboShield

CarboShield is a coating based on carbon metamaterials intended to guard rooms in buildings, technical installations, electronic modules and components, etc against electromagnetic radiation.CarboShield is optimized for radiation extinction over a very wide frequency band. It dissipates electromagnetic radiation, i.e. the radiation enters into the material and the backscattering is reduced.

Properties Suppliers
Carbomide 615

Carbomide 615 is used in formulations of coatings with and without solvents, paints of colorless or pigmented finishing, for application in steel, mineral substrates, industrial floor, encapsulation, adhesives and laminates.

Properties Suppliers
Carbopol 1620

Carbopol 1620 polymer is a powdered synthetic thickener based on polyacrylic acid. It can be used as a primary thickener for most dye systems and demonstrates no ion sensitivity typical with most thickener systems. It is used in formulating a clear concentrate, which can then be readily used to form a stock clear.

Properties Suppliers
Carbopol 846

Carbopol 846 polymer is a powdered synthetic thickener based on polyacrylic acid. Carbopol 846 polymer is a versatile thickening agent, designed as the premiere print paste thickener. Carbopol 846 polymer is supplied as a fluffy, white, mildly acidic powder, and can be used in two ways to prepare a textile print paste.

Properties Suppliers
Carboxymethyl Cellulose

Carboxymethyl cellulose or cellulose gum is a cellulose derivative with carboxymethyl groups (-CH2-COOH) bound to some of the hydroxyl groups of the glucopyranose monomers that make up the cellulose backbone. It is often used as its sodium salt, sodium carboxymethyl cellulose. It is used in food science as a viscosity modifier or thickener, and to stabilize emulsions in various products including ice cream. It is also a constituent of many non-food products, such as K-Y Jelly, toothpaste, laxatives, diet pills, water-based paints, detergents, textile sizing and various paper products.

Properties Suppliers
CeRam-Kote 2000

CeRam-Kote 2000 is a thin-film, spray-applied and air-dried ceramic novalac epoxy coating system engineered to provide excellent chemical immersion service protection to all metals, fiberglass reinforced plastics, concrete and plastic substrata. CeRam-Kote 2000 is highly cross-linked to provide superior chemical resistance.

Properties Suppliers
CeRam-Kote 2000TL

CeRam-Kote 2000TL is a thin-film, spray-applied and air-dried ceramic novalac epoxy coating system engineered to provide excellent acid immersion service protection to all metals, fiberglass reinforced plastics, concrete and plastic substrata. CeRam-Kote 2000TL is highly cross-linked to provide superior chemical resistance.

Properties Suppliers