Buy paint additives, chemicals | paint additives manufacturers | paint additives suppliers } Worldofchemicals

chemical-categories

Carbo e-Therm

Carbo e-Therm is a high-efficiency, electrically heated coating developed for use in the nonhazardous low-voltage range.Carbo e-Therm is suitable for temperatures up to approx. 500°C. Its excellent applicability to very different geometries and surfaces plus high heating power open up a wide field of possible uses.

Properties
Carbomide 615

Carbomide 615 is used in formulations of coatings with and without solvents, paints of colorless or pigmented finishing, for application in steel, mineral substrates, industrial floor, encapsulation, adhesives and laminates.

Properties
Carbopol 1620

Carbopol 1620 polymer is a powdered synthetic thickener based on polyacrylic acid. It can be used as a primary thickener for most dye systems and demonstrates no ion sensitivity typical with most thickener systems. It is used in formulating a clear concentrate, which can then be readily used to form a stock clear.

Properties Suppliers
CeRam-Kote 54

CeRam-Kote 54 is a thin-film, spray applied and air-dried ceramic coating engineered to provide excellent abrasion and corrosion protection in critical service environments for all metals, fiberglass reinforced plastics, concrete and plastic substrates. CeRam-Kote 54s highly modified epoxy resin system has been heavily loaded with a unique package of ceramic particles to enhance performance in extremely aggressive environments.

Properties Suppliers
CeRam-Kote 60

CeRam-Kote 60 is a thin-film, spray applied and air-cured ceramic epoxy coating system engineered to provide abrasion and corrosion protection to all metals, fiberglass reinforced plastics, concrete and plastic substrates. It is an epoxy resin system that has been loaded with ceramic particles. CeRam-Kote 60 must be topcoated for aesthetic purposes with a CeRam-Thane product.

Properties Suppliers
CeRam-Kote 99

CeRam-Kote 99 is a thin-film, spray applied and air-cured ceramic epoxy coating system recommended for atmospheric corrosion, abrasion resistance as well as some chemical immersion service. CeRam-Kote 99 is available in a variety of colors.

Properties Suppliers
CleanGrip 111

CleanGrip 111 is an alumina based, nonskid coating designed to reduce the slipperiness of shipping containers by providing excellent slide angles. CleanGrip 111 has a low pH that does not resolubilize ink and can prevent ink smearing. It is designed to be applied by spray coater or roll coater.

Properties Suppliers
CoatOSil 1221

surfactant is a non-fluorine based organomodified siloxane surfactant with the unique superwetting properties in waterborne coatings for spray applications, high-speed roll applications and hard-to-wet surfaces. It can also improve flow and leveling properties, while remaining stable in aqueous formulations having pH 6-8.

Properties Suppliers
CoatOSil 2400

CoatOSil 2400 coatings additive is a polyethylene oxide-modified silicone copolymer with an unusually high degree of modification, making it very compatible with waterborne solvents and resins and compatible with solvent-borne systems.It exhibits flow and leveling improvement without foam generation in conventional and high-solids solvent-borne systems.

Properties Suppliers
CoatOSil 3500

CoatOSil 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X