Buy paint additives, chemicals | paint additives manufacturers | paint additives suppliers } Worldofchemicals

chemical-categories

Ebot-W

Ebot-W is a 2 components, low V.O.C. water-based epoxy with bitumen extender designed as an anticorrosion coating over various types of substrate. It can also be use as an undercoat for water-based topcoats like epoxy and polyurethane.

Properties Suppliers
Electrodag 1015

Electrodag 1015 is a screen printable UV curable dielectric coating formulated to provide electrical insulation in the manufacture of flexible circuitry. It has been engineered to provide outstanding adhesion to a wide spectrum of polyester film substrates. It was designed to be printed over Electrodag 725A series conductive inks.

Properties Suppliers
Emdicryl 267

Emdicryl 267 is having excellent scrub resistance and colour acceptance and good resistance to dirt pick-up,u.v.etc for premium quality interior/exterior paint.

Properties Suppliers
Enafoam

Enafoam is a group of tailor-made foaming and air-entraining agents intended for concrete and gypsum applications. Enafoam product range is based on anionic surface active agents - alkyl ether sulfates, alkyl sulfates and their mixtures.

Properties Suppliers
Enasta OD

Enasta OD is a series of mould release agents. Enasta OD series include range of high-performance mould release agents with various compositions. ENASTA OD products are intended for use in compressed, horizontally vibrated and other concrete components.

Properties Suppliers
Epichlorohydrin

Epichlorohydrin is an organochlorine compound and an epoxide. It is a highly reactive compound and is used in the production of glycerol, plastics, epoxy glues and resins, and elastomers. Epichlorohydrin is a versatile precursor in the synthesis of many organic compounds. It used as a solvent for cellulose, resins and paints and it has found use as an insect fumigant.

Properties Suppliers
Epoxy Zinc Rich Primer

Epoxy Zinc Rich Primer is a two pack system enriched with metallic zinc to provide outstanding performance in highly corrosive environment. Metallic Zinc imparts Cathodic protection to the base metal and Epoxide groups react with polyamide / Amine adduct hardener to form tough, non convertible film at ambient temp. It resists photo degradation by UV light as it contains UV absorber. Suitable for application as a priming coat on structural steel, pipelines, tank exteriors of refineries, power generation plants, mining facilities bulk handling equipment and fertilizer industries etc.

Properties Suppliers
Erbium Metal Purified 99.9%

Erbium metal is silver gray rare earth. It is stable in air, however it would slowly react with water and air. It should avoid air, oxides, halogen, acid and moisture. At high temperature, it compound with halogen, oxide, nitride, carbide, silicon and form corresponding compounds. It can process into foil, sheet, rod, wire, powder and sputtering target. Er ingot is of REM 99.9% by distillation method. Erbium powder is of REM 99.9% and particle size -100mesh and -200mesh. There are two production methods, distillation method and reduction method. The distilled erbium piece is dendritic with higher purity than reduced one.

Erbium Metal

Purity: Er/REM 99.9% 3N

CAS No.:7440-52-0 EINECS No.:231-160-1 Molecular Formula:Er Molecular Weight:167.26
Melting Point:1529℃ Boiling Point:2863℃ Density:9.062  

Applications

Erbium metal get uses in nuclear and alloys for example vanadium-erbium alloys, titanium-erbium alloys. Till now, the most prominent application is erbium dopant fiber amplifier. It is doping small amount of erbium ion in quartz fiber. Another prospect application is laser , especially medical laser. Erbium is laser ion that transferring laser materials including monocrystal(fluoride, oxysalt) and fiberglass, for example Er:YAP crystal and ZrF4-BaF2-LaF3-AlF3-NaF fiberglass.  These already get commercial uses. Yb,Er:BaYF5 can convert infrared ray to visible light. This kind of photo converting material apply to night-vision successfully.Erbium metal is silver gray rare earth. It is stable in air, however it would slowly react with water and air. It should avoid air, oxides, halogen, acid and moisture. At high temperature, it compound with halogen, oxide, nitride, carbide, silicon and form corresponding compounds. It can process into foil, sheet, rod, wire, powder and sputtering target. Er ingot is of REM 99.9% by distillation method. Erbium powder is of REM 99.9% and particle size -100mesh and -200mesh. There are two production methods, distillation method and reduction method. The distilled erbium piece is dendritic with higher purity than reduced one.

Erbium Metal

Purity: Er/REM 99.9% 3N

CAS No.:7440-52-0 EINECS No.:231-160-1 Molecular Formula:Er Molecular Weight:167.26
Melting Point:1529℃ Boiling Point:2863℃ Density:9.062  

Applications

Erbium metal get uses in nuclear and alloys for example vanadium-erbium alloys, titanium-erbium alloys. Till now, the most prominent application is erbium dopant fiber amplifier. It is doping small amount of erbium ion in quartz fiber. Another prospect application is laser , especially medical laser. Erbium is laser ion that transferring laser materials including monocrystal(fluoride, oxysalt) and fiberglass, for example Er:YAP crystal and ZrF4-BaF2-LaF3-AlF3-NaF fiberglass.  These already get commercial uses. Yb,Er:BaYF5 can convert infrared ray to visible light. This kind of photo converting material apply to night-vision successfully.

Properties Suppliers
Erbium Oxide Purified 99.9%

Erbium oxide is pink powder, which is rare earth oxide. It is insoluble in water, but soluble in acid. Er2O3 absorb CO2 and H2O in air to form subcarbonate salts. It is stable at room temperature and pressure. When heating to 1300℃, it turns into hexagonal crystal and not melt. Its property and production method is close to other lanthanum series elements.

Erbium Oxide

CAS No.:12061-16-4 EINECS No.:235-045-7 Molecular Formula:Er2O3 Molecular Weight:382.52
Density:8.64 Melting Point:1522℃ Boiling Point:2355℃  

Applications

Erbium(III) oxide mainly applies as dopant of yttrium iron garnet and control material of nuclear reactor. It is also raw material for special luminescent glasses and infrared absorbing glass.

Erbium trioxide is colorant for glass, which make glass show rosy. It is also additive for yttrium aluminum garnet laser material and activating agent for fluorescent powder. It is catalyst for prepare oil chemicals.

In producing crystal glass, it need remove yellow color that caused by 3+ iron ion. Adding erbium(III) oxide with or without neodymium oxide remove yellow efficiently.

 

Properties Suppliers
ErkamarVP 5885

ErkamarVP 5885 is internal plasticized maleic resin. It light, yellowing stable combination resin for printing inks with high flexibility as well as high adhesion and wetting properties, due to its very low odor also suitable in overprint varnishes, as combination resin in powder coatings the reverse impact followed by high adhesion properties is improved.

Properties Suppliers