Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
LUXAN are synthetic pearlescent pigments based on highly transparent borosilicate glass that creates the impressive sparkle effect. LUXAN produces unusual, three-dimensional reflection effects and adds depth.
SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyes-ters, and polyvinyl chloride.
SYMIC are pearlescent pigments based on synthetic mica substrates that are refinished by the application of advanced coatings and special classification technologies. Its special strengths are the optical effects and its outstanding resistance to the weather and to chemicals, along with excellent intercoat adhesion.
AVEDEX is the key raw material in adhesives formulations. AVEDEX stands for a large range of hydrolysed starch products.
AgPURE nanosilver is a high efficiant antimicrobial additive for all types of materials (Lacquers, coatings, polymers etc.) fighting infections, odours and stain caused by microorgansims. AgPURE is the standard reference materials for nanosilver.
Arctic pigments will exhibit greater Total Solar Reflectance (TSR) than the exact same color made with conventional pigments.Arctic pigments are perfectly suitable for all types of architectural finishes,including highly-alkaline masonry coatings.
BC 403 silicone glycols are a combination of polydimethylsiloxane with polyoxyalkylene materials. They are also known as silicone polyethers or Dimethicone Copolyols. This combination gives properties which are unique to this type of material.
BC 404 silicone glycols are a combination of polydimethylsiloxane with polyoxyalkylene materials. They are also known as silicone polyethers or Dimethicone Copolyols. This combination gives properties which are unique to this type of material.
Cobalt is found naturally only in chemically combined form. It is used in the preparation of magnetic, wear-resistant and high-strength alloys. Cobalt silicate and cobalt(II) aluminate give a distinctive deep blue color to glass, smalt, ceramics, inks, paints and varnishes. Lithium cobalt oxide is widely used in lithium ion battery cathodes. Several cobalt compounds are used in chemical reactions as oxidation catalysts. Other uses of cobalt are in electroplating, owing to its attractive appearance, hardness and resistance to oxidation, and as ground coats for porcelain enamels.
Ebot-W is a 2 components, low V.O.C. water-based epoxy with bitumen extender designed as an anticorrosion coating over various types of substrate. It can also be use as an undercoat for water-based topcoats like epoxy and polyurethane.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder