plastics, polymer industry chemicals | polymer chemicals manufacturers, suppliers

chemical-categories

ALCOTEX 975

Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. Alcotex 975 has a high hydrolysis level and a medium molecular weight. Alcotex 975 may be poured or pumped using a wide variety of processing equipment, designed for handling flammable liquids. Alcotex 975 should be stored in sealed containers as received.

Properties Suppliers
ALCOTEX B72

Alcotex B72 is polyvinyl alcohol which has been specially developed for use as a primary suspending agent for vinyl chloride suspension polymerization. Alcotex B72 has been developed to meet the needs of PVC manufacturers who require good grain size control at cost effective concentrations. Alcotex B72 is used to make PVC with a wide range of porosities and bulk densities. Alcotex B72 is not prone to dusting.

Properties Suppliers
ALCOTEX WD100

Alcotex WD100 is an aqueous solution of a 43% hydrolyzed polyvinyl alcohol. It has been specifically developed by Synthomer Ltd as a secondary suspending agent for vinyl chloride polymerization. Infinitely dilutable in water, and with extremely low methanol content, Alcotex WD100 offers increased PVC resin porosity and reduced levels of gels or fish eyes when compared to traditional products. Alcotex WD100 is also compatible with other conventional primary suspending agents. Alcotex WD100 is stable under normal storage conditions, but extremes of temperature should be avoided.

Properties Suppliers
AMBERLAC 1074-V-60

AMBERLAC 1074-V-60 is a vinyl toluene/vegetable oil copolymer which cures by oxidation at ambient and elevated temperatures in the presence of metallic driers. It offers fast dry, high gloss, excellent spray properties and more.

Properties Suppliers
AMBERLAC 13-031

AMBERLAC 13-031 is a styrene-modified alkyd resin for use in air or force-dry enamels offering fast dry, excellent hardness and good color.

Properties Suppliers
AMBERLAC 13-038

AMBERLAC 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha. used in aerosol finishes, toy enamels, coatings for plastics, industrial primer and topcoats.

Properties Suppliers
AMBERLAC 13-802

AMBERLAC 13-802 is an acrylic-modified alkyd. It is compatible with thermoplastic acrylics and offers fast drying, good color retention and excellent hardness.

Properties Suppliers
AMBERLAC 13802-E2

AMBERLAC 13802-E2 is a dehydrated castor oil based acrylic modified alkyd supplied in tertiary butyle acetate and Aromatic 100 solvents.

Properties Suppliers
ARDEX AF 2510

ARDEX AF 2510 is a two part polyurethane adhesive for fixing PVC, Polyolefins (planks and tile), linoleum, rubber and hardwood floorcoverings. It is water resistant when fully cured and is virtually emission free enabling thin PVC floorcoverings to be installed without bubbling. It is smooth and easy to trowel with small or large notched trowels for PVC and large format hardwood boards.ARDEX AF 2510 can be used on or over smoothing underlayments, sand and cement screeds, calcium sulfate screeds, concrete.

Properties Suppliers
ARDEX AF 650

ARDEX AF 650 is a heavy duty polychloroprene contact adhesive for fixing PVC and rubber floorcoverings, stair nosings, PVC skirting, stair stringers and cork with natural cork backing. ARDEX AF 650 is a contact adhesive and therefore requires to be applied to both the sub-floor/wall and floorcovering material and given time to dry.It can be used on or over smoothing underlayments, sand and cement screeds, concrete.

Properties Suppliers