Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Triethyleneglycol Divinyl Ether is a crosslinking monomer. Used in UV curing coatings.
Tris(2-carboxyethyl)isocyanurate and esters, amides, anhydrides and acid halides thereof undergo pyrolysis to afford cyanuric acid and acrylic acid or the corresponding ester, amide, anhydride or acid halide thereof. The process provides an in situ source of acrylate derivatives.
CESA-flam additive Masterbatches help manufacturers meet UL and other regulatory requirements by minimizing flame propagation, smoke and heat generation.
Diisopropylbenzene Hydroperoxide is used to make hydroquinone and resorcinol, as an initiator for cold SBR polymerization, and as a curing agent for polyester resins.
Low Molecular Weight Polystyrene is a low molecular weight homopolymer of Styrene.It finds applications in diverse Industries.Low Molecular Weight Polystyrene is used as a filler in wax used in investment precision casting,component in the formulation of printing inks, lowprofile additive in SMC & DMC compounds, reinforcement filler in rubber formulations used in microcelluar soles & Hawai chappals and non migrating polymeric plasticizer in PVC extrusion compounds.
nil
Trimethylolpropane diallylether, containing one hydroxyl group and two allyl bonds in a quaternary mole structure, is a clear liquid. It is applied in unsaturated polyesters and resins to improves heat resistance, color stability, balance between toughness and flexibility. Allyl group functionality gives the advantage to inhibit oxygenation from surface tackiness in curing resins. It is also used in lubricating oils and plasticizers.
Tris(2,3-dibromopropyl) phosphate has been recommended for use in phenolic resins, paints, paper coatings and rubber. It is used mainly in polyester and cellulosic acetate fabrics, but it has also been used in acrylic fabrics. It may be added to textiles by the producer, although addn by dyers and finishers is believed to be more usual, at a level of 6-10% by wt. Its addn to polyurethane foams is the major use in plastics; relatively small amounts are believed to be used as an additive to polystyrene foam. Rigid foams containing tris(2,3-dibromopropyl) phosphate are used in insulation, furniture, automobile interior parts and water floatation devices
Styrene acrylonitrile resin is a copolymer plastic consisting of styrene and acrylonitrile. It is also known as SAN. It is widely used in place of polystyrene owing to its greater thermal resistance. The chains of the polymer show alternating repeat units of styrene and acrylonitrile, and it is a copolymer. The relative composition is typically between 70 and 80% styrene and 20 to 30% acrylonitrile. Larger acrylonitrile content improves mechanical properties and chemical resistance, but also adds a yellow tint to the normally transparent plastic.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder