plastics, polymer industry chemicals | polymer chemicals manufacturers, suppliers

chemical-categories

PLEXTOL R 815

PLEXTOL R 815 is acrylic copolymer dispersion. PLEXTOL R 815 is a fine particle size, surfactant stabilized, heterogeneous dispersion. PLEXTOL R 815 offers high gloss, block resistance, wet adhesion, and alkali and water resistance. PLEXTOL R 815 is recommended for gloss paints, varnishes and stains.

Properties Suppliers
PLEXTOL SBV 425

PLEXTOL SBV 425 is an aqueous colloidal dispersion of a self-cross linking copolymer of butadiene and styrene. PLEXTOL SBV 425 contains a very low amount of an anionic emulsifier and is stabilized with an antioxidant. PLEXTOL SBV 425 is protected against bacterial attack during storage. PLEXTOL SBV 425 is supplied in road tankers or in non-returnable plastic drums secured by a lid with a clamping ring or in non-returnable palletized bulk containers.

Properties Suppliers
PLEXTOL T 70S10

PLEXTOL T 70S10 is an aqueous solution based on acrylate copolymer. It is used as thickening agent in aqueous compounds and dispersions. PLEXTOL T 70S10 contains a preservative to counter microbial contamination during transport.

Properties Suppliers
PLEXTOL T 74K30

PLEXTOL T 74K30 is an aqueous dispersion of a acrylic ester-styrene copolymer. PLEXTOL T 74K30 also can be used for the one coat process. PLEXTOL T 74K30 has good storage characteristics and also good mechanical and chemical stability. It contains a preservative to counter microbial attack during transportation.

Properties Suppliers
POLYCOL - HCLA

POLYCOL - HCLA is used in polyester dyeing and printing.

Properties Suppliers
POLYCOL- MCCI

POLYCOL- MCCI is used in polyester dyeing and printing.

Properties Suppliers
POLYCOL- PDM

POLYCOL- PDM is used in polyester dyeing and Printing.

Properties Suppliers
POLYGEN- DFT

POLYGEN- DFT is an levelling / stripping agent for disperse dyeing.

Properties Suppliers
PVC RESIN SUSPENSION GR K65/67

PVC RESIN SUSPENSION GR K65/67 is designed to give an easy processing product for extrusion rigid applications since it has moderate melt viscosity with high melt strength.It is mainly designed for pipe and profile products.It is manufactured by suspension polymerization.PVC K67 is having Very low dust-level (Easy handling and conveying),High bulk density (Good material compaction and high production rates),Narrow particle size distribution (Easy processing),High melt strength (Good for fast processes like pipe and profile extrusions),High tensile properties (Good end product performance) special properties that makes it suitable for rigid PVC extrusion with high production rates. It is mainly used in rigid sheets, film, floor tiles, pipes, fittings, Wires&cables.

Properties Suppliers
Palatinol 810TM

Palatinol 810TM is a linear octyl decyl trimellitate. It acts as a plasticizer. When compared to TOTM and TINTM, formulations made with Palatinol 810TM exhibit superior low temperature flexibility and resistance to oxidative degradation at high temperatures. This trimellitate offers a unique combination of easy processability, a high degree of permanence and good compatibility. Palatinol 810TM is compatible with polyvinyl chloride resins and copolymers. Palatinol 810TM suitable for use in wire and cable insulation, refrigerator gasketing, where lacquer mar resistance is a factor, and very low fog automotive components.

Properties Suppliers