plastics, polymer industry chemicals | polymer chemicals manufacturers, suppliers

chemical-categories

Polyvinyl Chloride

Polyvinyl Chloride is commonly abbreviated PVC, is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. Polyvinyl Chloride The rigid form of PVC is used in construction for pipe and in profile applications such as doors and windows. It is also used for bottles, other non-food packaging, and cards. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates.

Properties Suppliers
Relene LL36RA045UV

Relene LL36RA045UV is a Butene Comonomer based Linear Medium Density Polyethylene (LLDPE). Relene LL36RA045UV grade is stabilised with appropriate quantity of HALS to give a long service with continuous outdoor exposure with or without blending of any carbon black. Relene LL36RA045UV when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of AO and high dose of UV stabiliser.

Properties Suppliers
SABIC LLDPE 318CNJ

SABIC LLDPE 318CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications. It contains optimized level of antioxidants and does not contain any slip and antiblock additives. It is a sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. SABIC LLDPE 318CNJ used for jacketing applications, addition of Carbon Black or UV stabilizer is required.One-step or two-step Silane cross-linkable insulation for Low Voltage power insulation cable, Aerial bundle cable and suitable for elecommunication.

Properties Suppliers
SABIC LLDPE 324CNJ

SABIC LLDPE 324CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications.It contains low levelof antioxidants and does not contain any slip and antiblock additives.It is sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. SABIC LLDPE 324CNJ used for jacketing applications, addition of Carbon Black or UV stabilizer is required.

Properties Suppliers
Triethylene Glycol

Triethylene Glycol is derived as a coproduct in the manufacture of ethylene glycol from ethylene oxide.It is a larger molecule than MEG, DEG and has two ether groups. It is less clear and less hygroscopic.It is useful in the dehydration of gases, manufacture of insecticides and in the synthesis of some organic derivatives.It is also used in the production of plasticizers for cellophane, glue, cork, powdered ceramics and some plastics, as a component in the formulation of some pigments, printing dyes, inks and pastes. It is also used for air fumigation.

Properties Suppliers
Trimethylolpropane

Trimethylolpropane is an organic compound. This colorless solid is a triol containing three hydroxy functional groups. Trimethylolpropane is widely used building block in the polymer industry. It is mainly consumed as a precursor to alkyd resins. Otherwise, acrylated and alkoxylated TMP's are used as multifunctional monomers to produce various coatings, Ethoxylated and propoxylated TMP, derived condensation of from TMP and the epoxides, are used for production of flexible polyurethanes.

Properties Suppliers
Vinnolit S 3157/11

Vinnolit S 3157/11 is a free-flowing powder produced by suspension copolymerization of vinyl chloride and vinyl acetate. The product contains about 11 percent vinyl acetate. It is a speciality resin for manufacturing of high-quality rigid film.Vinnolit S 3157/11's k-value is 57.

Properties Suppliers
XIRAN Heatboosters

XIRAN Heatboosters offers a solution for a wide range of engineering plastics such as ABS, PMMA, PLA and PVC. Increased thermal resistance offers solutions in processing temperatures and opens up windows in applications areas where higher temperature resistance is required. These neat resins are available under the brand names XIRAN SZ and XIRAN IZ.

Properties Suppliers
o-Tolamine mixture

o-Tolamine mixture is mainly used in Textiles and fibres, Textile dyestuffs, Polyurethanes, Polymer auxiliaries, Plastic & Polymers, Manufacturing of textile dyestuffs, Manufacturing of plastics, Manufacturing of dyestuffs, Dyestuffs, pigments and optical brighteners.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X