plastics, polymer industry chemicals | polymer chemicals manufacturers, suppliers

chemical-categories

SABIC LLDPE F2111BS

SABIC LLDPE F2111BS is a linear low density polyethylene resin and is typically used for blown film applications.Films made from SABIC LLDPE F2111BS resin typically exhibits good optical properties, impact strength and tensile properties. SABIC LLDPE F2111BS contains high level of both slip and anti-blocking agents.Heavy duty liner, carrier bag, garment packaging, mulch film, garbage bag. SABIC LLDPE F2111BS is not intended for use in medical and pharmaceutical applications.

Properties Suppliers
Sodium Polyacrylate

Sodium Polyacrylate is a superabsorbent polymer, having the good absorbance, retention of water properties.Sodium polyacrylate is an anionic polyelectrolyte with negatively charged carboxylic groups in the main chain, with the formula (C3H3NaO2)n. Sodium Polyacrylate uses finds in various consumer products like sequestering agent, or chelating agent in detergents,thickening agent in diapers, pets pad, water retaining material, instant snow.As a thickening agent, sodium polyacrylate can increase the viscosity of water-based compounds, which increases their stability.In diapers, sodium polyacrylate polymer will absorb the water molecules found in urine, increasing the amount of liquid the diaper can hold while at the same time reducing the risk of diaper rash by promoting a dry environment. Florists commonly use sodium polyacrylate to help keep flowers fresh. Sodium polyacrylate has been included in the coatings of sensitive electrical wiring to keep moisture away from the wires.

Properties Suppliers
TRACEL TSE 3140 ACR

TRACEL TSE 3140 ACR is a free foam sheets and profiles, exo-/endothermic nature and designed for continuous dosing operations.

Properties Suppliers
TricresyI Phosphate

TricresyI Phosphate also called tricresylphosphate, tritolyl phosphate, tolyl phosphate, or tri-o-tolyl ester of phosphoric acid, is an organic compound, an organophosphate, an ester of phosphoric acid.TricresyI Phosphate is used plasticizers for vinyl films in agriculture due to its weather resistance property.Insulator compounds for electric cables and also in the synthetic rubber compounds.TricresyI Phosphate also used as Lubricant additive and has been proven effective as mild extreme pressure addictive for synthetic oil.TricresyI Phosphate is useful in the clear and dark coloured flame-retardant sheeting where pigmenting or opecifying flame retardants are undesirable.

Suppliers
Triphenyl Phosphate

Triphenyl Phosphate is used as a plasticizer and a fire retardant and most commonly used as flame retardant for cellulose acetate, in which it imparts flame resistance, good clarity, excellent water resistance, good flexibility, and toughness with no tendency toward tackiness.It improves tensile strength in nitrocellulose films.

Properties Suppliers
Vinylidene Chloride

Vinylidene chloride is a monomer.It is used to make various kinds of chemical intermediates, agricultural chemicals.

Properties Suppliers
1,1-Difluoroethylene

1,1-Difluoroethylene is a hydrofluoroolefin. Global production in 1999 was approximately 33,000 metric tons. It is primarily used in the production of fluoropolymers such as polyvinylidene fluoride.

Properties Suppliers
1,2-Dichloroethylene

1,2-Dichloroethyleneis an organochloride . It is a highly flammable, colorless liquid with a sharp, harsh odor. It can exist as either of two geometric isomers, cis-1,2-dichloroethene or trans-1,2-dichloroethene, but is often used as a mixture of the two. It is minimally soluble (5090 mg/L for the cis-isomer[1]) in water, and soluble in ethanol, diethyl ether, acetone, benzene, and chloroform.1,2-DCE is used as a solvent for waxes, resins, polymers, fats, and lacquers. It is also used as an intermediate in the preparation of other chlorinated solvents.The major health effect of inhalation of vapors of 1,2-DCE is narcosis; it has been used in a combination with diethyl ether as an anesthetic. In high concentrations, exposure to 1,2-DCE causes

Properties Suppliers
1,3-Dihydroxybenzene

1,3-Dihydroxybenzene is the 1,3-isomer of benzenediol. Used externally it is an antiseptic and disinfectant, and is used 5 to 10% in ointments in the treatment of chronic skin diseases. It is also used as a chemical intermediate for the synthesis of pharmaceuticals and other organic compounds. It is used in the production of diazo dyes and plasticizers and as a UV absorber in resins.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X