Rubber processing aids | processing aids manufacturers, suppliers | PVC processing aids

chemical-categories

ULTRA-LUBE 330

ULTRA-LUBE 330 is being used as a general purpose processing additive in most common polymers.

Properties Suppliers
Ultra-Flow 550

Ultra-Flow 550 is a very effective material for the physical peptisation of NR. It can be applied in mastication only, as well as in the pre-mastication phase of single stage mixing.

Properties Suppliers
Ultra-Flow 600

Ultra-Flow 600 is a very effective material for the physical peptisation of NR. It can be applied in mastication only, as well as in the pre-mastication phase of single stage mixing.It facilitates as a general purpose additive mixing and processing as well as improves the incorporation of compounding ingredients.

Properties Suppliers
Ultra-Lube 200

Ultra-Lube 200 is a processing additive for most polymers. It shows outstanding performance as a dispersing aid for commonly used fillers in rubber compounding. In injection and transfer moulding it leads to faster mould filling due to its internal lubrication. It also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. It has a chemical structure which does not adversely interfere with most curing systems. Due to its low dosage level there is little or no effect on physical properties of the finished goods.

Properties Suppliers
Ultra-Lube 220

Ultra-Lube 220 is a processing additive to improve filler incorporation and release of most rubber compounds. Due to its low volatility, Ultra-Lube 220 can be used in heat resistant vulkanisates.It shows good plasticising properties, which leads to reduction of injection pressure in the moulding process and prevents scorch.It is highly effective in polar compounds, e.g. NBR, to improve flow and release. It can be used at very low dosage levels.

Properties Suppliers
Ultra-Lube 420

Ultra-Lube 420 is a processing additive for applications in all elastomers.

Properties Suppliers
Ultra-Lube 480

Ultra-Lube 480 is a highly effective process additive for speciality Polymers.

Properties Suppliers
Ultra-Lube 790

Ultra-Lube 790 is a processing additive designed as an internal lubricant for compounds based on specialty polymers. Due to its low volatility, ULTRA-LUBE™ 790 can be used in heat resistant vulcanisates, e.g. Based on H-NBR, FKM and ACM.

Properties Suppliers
Ultra-Pep 92

Ultra-Pep 92 is a combined peptizing and processing additive for natural and peptisable synthetic rubbers.ULTRA-PEP™ 92 is easily dispersed in rubber due to its lower concentration and the high content of dispersing agent present.

Properties Suppliers
Ultra-Pep 96

Ultra-Pep 96 is a combined peptizing and processing additive for natural rubber. ULTRA-PEP™ 96 is easily dispersed in rubber due to its content of dispersing agent present.

Properties Suppliers

123