Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

Bisphenol A

Bisphenol A is an organic compound with two phenol functional groups. Bisphenol A was first synthesized by the Russian chemist A.P. Dianin in 1891. Bisphenol A is used to make polycarbonate plastic and epoxy resins, along with other applications.It is part of the bisphenols group of chemical compounds with two hydroxyphenyl groups. It is a colorless solid that is soluble in organic solvents, but poorly soluble in water.It is also used in making thermal paper such as that used in sales receipts.Bisphenol A is an endocrine disruptor that can mimic estrogen and has been shown to cause negative health effects in animal studies.

Suppliers
Bismaleimide

Bismaleimides are usually not used in their pure solid form, that is, they are often blended with reactive co-monomers such as vinyl and allyl compounds, allyl phenols, isocyanates, and aromatic amines. These blends are usually easier to process and have improved toughness and flexibility.

Suppliers
Maleic Anhydride

We are engaged in offering highly effective Maleic Anhydride that is an organic compound with the formula C2H2(CO)2Os. Our vendor's experienced professionals process this chemical using quality approved chemical compounds and ultra-modern techniques at par with industry quality standards. Mainly used to manufacture unsaturated polyester resins, the chemical provided by us is made available in different packaging options as per the need of clients. Additionally, clients can avail this Maleic Anhydride from us at market leading prices with no hassle.

Suppliers
Cyclohexyl vinyl ether

Cyclohexyl vinyl ether is mainly used as monomer for fluroresin, as modifiers and other applications.

Suppliers
Mono-N-butyl tin oxide

Mono Butyl Tin Oxide (MBTO) is an amorphous white solid phase transfer catalysts. MBTO is hydrolytically stable and can be used in the synthesis of saturated polyester resins for powder coatings and coil coatings, as well in the production of unsaturated polyester resins for gel-coat, sheet molding, and cast molding applications. It might be used also to produce polymeric plasticizers.MBTO begins to solubilize in carboxylic acid at 80°C during the reaction and becomes incorporated into the final product without affecting the quality of the product. For this reason MBTO does not require neutralization or filtration at the end of production.MBTO can significantly shorten esterification times, offers energy savings due to lower reaction temperatures, with a consequent more efficient use of equipment. MBTO minimizes side reactions such as dehydration and oxidative degradation of polyhydric alcohols, especially secondary alcohols. MBTO can be charged up front with other reactants, and requires no special handling other than avoiding excessive exposure to moisture.

Suppliers
Isophthalic Acid Industrial Grade

Isophthalic Acid is used primarily in unsaturated polyester resins. It improves the property balance for coating resins and enhances clarity of PET-bottle grade resins. Isophthalic Acid is used as an intermediate primarily for unsaturated polyester resins and alkyd and polyester coating resins; other applications include use in aramid fibers, as a component of copolyester resins and in high-temperature polymers.

Suppliers
Polyacrylonitrile

Polyacrylonitrile is a synthetic, semicrystalline organic polymer resin. It degrades before melting. Polyacrylonitrile melts above 300 °C if the heating rates are 50 degrees per minute or above.It is a versatile polymer used to produce large variety of products including ultra filtration membranes, hollow fibers for reverse osmosis, fibers for textiles, oxidized PAN fibers. Polyacrylonitrile fibers are the chemical precursor of high-quality carbon fiber. PAN is first thermally oxidized in air at 230 degrees to form an oxidized PAN fiber and then carbonized above 1000 degrees in inert atmosphere to make carbon fibers found in a variety of both high-tech and common daily applications such as civil and military aircraft primary and secondary structures, missiles, solid propellant rocket motors, pressure vessels, fishing rods, tennis rackets, badminton rackets & high-tech bicycles. It is a component repeat unit in several important copolymers, such as styrene-acrylonitrile (SAN) and acrylonitrile butadiene styrene (ABS) plastic. It has properties involving low density, thermal stability, high strength and modulus of elasticity.Its high tensile strength and tensile modulus are established by fiber sizing, coatings, production processes, and Polyacrylonitrile's fiber chemistry. Its mechanical properties derived are important in composite structures for military and commercial aircraft. Polyacrylonitrile is used as the precursor for 90% of carbon fiber production.

Properties Suppliers
Nisseki Neopolymer (Aromatic Petroleum Resin)

Nisseki Neopolymer is a aromatic petroleum resin used in a wide range of fields, such as paints, printing inks, adhesives and agglutinants, rubber tackifier, and asphalt tackifier.

Properties Suppliers
P-11

P-11 is a linear oil free polyester resin developed for use in coil coating, sheet fed metal decorating and general industrial applications. It is compatible with wide range of melamine resins and is typically used with hexamethoxymethyl melamines and partially methylated melamines.

Properties Suppliers
P-13

P-13 is used as a binder for car body fillers and for automotive putty. The putty forms hard and tough film on curing. It provides very good adhesion on metal and further it is 100% VOC free. It is a unsaturated polyester resin based on DCPD dissolved in styrene, and the resin is pre-accelerated with polyamine resin which has a medium viscosity and high reactivity.

Properties Suppliers

12345...71
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X