Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

2-(2-ethoxy ethoxy)-ethanol Technical 99.5

Stable. Combustible. Note wide explosion limits. Incompatible with strong oxidizing agents, strong acids, acid chlorides, acid anhydrides. Hygroscopic. ORL-RAT LD50 6500 mg kg-1 , SKN-RAT LD50 6000 mg kg-1 , IPR-RAT LD50 6310 mg kg-1  

Gravity: 0.987-0.99 g/mL / 20 °C

Flash Point:  96 °C
 
Boiling Point: 201-202 °C

 

Suppliers
#1110 Vinyl Ester Resin

#1110 Vinyl Ester Resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. The properties of this resin allow it to withstand impacts and repeated flexing without developing cracks. It has a low viscosity, making it perfect for resin infusion applications. It can also be used for hand lay-up or spray applications that require excellent corrosion resistance, impact strength, and tensile elongation.

Properties Suppliers
#4114 Marine Epoxy Fairing Compound

#4114 Marine Epoxy Fairing Compound is a smooth, creamy paste system for fairing large surface imperfections on fiberglass, wood, aluminum, and steel. The compound is UV stable, weather resistant, and can be used for above- or below-the-waterline repair. It's versatile enough for surface repair on wooden marine vessels, wood cabinets, fiberglass structures, and architectural items. It is even used for finishing surfaces in clean room applications. This compound is mixed in an easy 1:1 volumetric ratio. Resin is white and hardener is brown, giving a good visual indication of complete mix when it presents a uniform tan color with no streaks. Once achieved, easily spread the creamy paste onto damaged or rough areas to create a smooth, cosmetic surface.

Properties Suppliers
#77 Polyester Molding Resin

#77 Polyester Molding Resin is ideal for general purpose part fabrication and for building low cost molds. It features an internal thickening agent which results in a high thixotropic index. This prevents drainage when applied to vertical surfaces, yet this polyester resin retains the low viscosity required for rapid wet out. As a first quality resin, the color, consistency, and properties of this resin will not vary from batch to batch. It is easy to work with and since it is wax free, customers don't have to sand between coats.

Properties Suppliers
1,2,3-Trimethylbenzene

1,2,3-Trimethylbenzene is mainly used for the preparation of aniline dyes, alkyd resins, polyester resins.

Properties Suppliers
1,2,4-Butanetriol

1,2,4-Butanetriol is an alcohol with three hydrophilic alcoholic hydroxyl groups. It is similar to glycerol and erythritol. It is chiral, with two possible enantiomers. It is used in the manufacture of butanetriol trinitrate, an important military propellant. It is also used as a precursor for two cholesterol-lowering drugs, Crestor and Zetia. It is as one of the monomers for manufacture of some polyesters and as a solvent.

Properties Suppliers
1,3-Butanediol

1,3-Butanediol is an organic chemical, an alcohol. It is commonly used as a solvent for food flavouring agents and is a co-monomer used in certain polyurethane and polyester resins.It is one of four stable isomers of butanediol. It is also used as a hypoglycaemic agent.

Properties Suppliers
1,4,5,6,7,7-Hexachlorobicyclo[2.2.1]Hept-5-Ene-2,3-Dimethanol

1,4,5,6,7,7-hexachlorobicyclo[2.2.1]hept-5-ene-2,3-dimethanol is used in the preparation of polyesters.

Properties Suppliers
1,4-Cyclohexanedicarboxylic Acid

1,4-Cyclohexanedicarboxylic Acid is a cycloaliphatic diacid offering many unique performance properties to polyester resins for coatings and fiberglass-reinforced plastics. Its symmetrical, 1,4-substituted cycloaliphatic ring brings properties ideally suited for high-performance applications in automotive, transportation, industrial maintenance, aerospace, architectural, appliance, and general metal coatings, and gel coats.

Properties Suppliers
1,4-Cyclohexanedimethanol

1,4-Cyclohexanedimethanol is an organic compound. It is a colorless low-melting solid used in the production of polyester resins.

Properties Suppliers

12345...69