Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

C5 hydrocarbon resin for thermoplastic paint Technical 99.9%

TR5100 hydrocarbon resin is a low molecular weight aliphatic hydrocarbon resin that has been designed for thermoplastic road marking system. It can enhance the adhesion and hardness of road marking paint, and make paint in stable situation in the four seasons.

 

Product Specification

 

Item

Test Method

Unit

Specification Range

Softening Point

ASTM-E-28

95-105

Color

ASTM-D1544

GC

4 max

Melt Viscosity

ASTM-D-3236

MPa·s

250 max

Insoluble

ASTM-E-99

Vol%

0.1 max

Acid Value

ASTM-D-974

Mg KOH/g

1 max

 

Application: Thermoplastic road marking paint

 

Features of TR5100 in thermoplastic road marking:

 

♦ Light color

 

♦ Good fluidity

 

♦ High anti-fraction

 

♦ Even distribution of filling material without sedimentation.

 

♦ Good heat stability

 

♦ Fast drying speed

 

♦ Good weather resistance, adhesive force and stain resistance.

 

 Package: 25kg kraft paper bag

 

 Storage:

 All resins with low softening point present a risk of solidifying or lump. For  softening point less or equal to 110℃,we suggest you keep resin in a cool (25℃ max)  ventilated place and avoid direct sunshine.

 

 

 

 

 

 

 

 

 

 

Properties Suppliers
C5/C9 Copolymerization Petroleum Resin

C5/C9 Copolymerized Hydrocarbon resins is a series of C5 Resin modified C9 resin obtained from copolymerizing of C5 fraction and C9 fraction that derived from the by-product of thermal cracking of naphtha. It is a granular solid resin with the color range from light yellow to yellow. It is not a high polymer, but a low polymer with the molecular weight range of 300-3000. C5/C9 petroleum resin has the advantages both of C5 resin and C9 resin. It has the characteristics of low acid value, good miscibility, water, ethanol and chemical resistance, the chemical stability against acid, the good adjustment of viscosity and thermal stability, weather resistance and light aging resistance because of non-polar groups in its structure. C5/C9 hydrocarbon resin has good solubility in organic solvents especially in oil solvent, as well as good compatibility with other resins. It also has brittle, increasing viscosity, cohesiveness and plasticity. Generally, it is not used alone, but used as accelerant, regulator and modifier together with other resins in Adhesive, Rubber, Tire and Coating, etc.

Properties Suppliers
CABELEC CA3817

CABELEC CA3817 is an electrically conductive compound based on conductive carbon black and a modified linear low density polyethylene resin. Its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. It is recommended for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary. CABELEC CA3817 can be processed on conventional extrusion equipment. It is strongly recommended to use low shear processing conditions.

Properties Suppliers
CABELEC CA4857

CABELEC CA4857 is an electrically conductive compound based on conductive carbon black dispersed in a modified styrenic resin. CABELEC CA4857 has been specially designed for packaging and electronic product handling where freedom from the hazard of electrostatic discharge is necessary.

Properties Suppliers
CABELEC CA4918

CABELEC CA4918 is an electrically conductive compound based on conductive carbon black and a modified low density polyethylene resin. Its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. CABELEC CA4918 has been specially designed for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary.

Properties Suppliers
CABELEC CA6114

CABELEC CA6114 is an electrically conductive compound based on conductive carbon black dispersed in a modified high density polyethylene resin. Its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. CABELEC CA6114 is used for injection moulding applications. It is recommended for product handling applications where freedom from the hazard of electrostatic discharge is necessary.

Properties Suppliers
CF Clear

CF Clear is a polymer seed film used in agriculture.

Properties Suppliers
CF Neutral

CF Neutral is a polymer seed film used in agriculture applications.

Properties Suppliers