Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

CF Neutral

CF Neutral is a polymer seed film used in agriculture applications.

Properties Suppliers
CLS 9310

CLS 9310 is a low viscosity impregnating compound used for coils and transformers.

Properties Suppliers
CNSL Resin

CNSL Resin is CNSL base mortar supplied in two components (resin & filler) recommended as bedding and jointing material for acids, alkalies, salts resisting brick/tile lining work on floor, drains, effluent treatment plants, reaction vessels etc. CNSL Resin can also be used as jointing material in mandana stone lining work. It is also most suitable mortar as jointing compound of S.W. pipes transporting acids, alkalies and industrial wastes containing corrosive chemicals.

Properties Suppliers
COLACRYL 1204

COLACRYL 1204 is an acrylic solution polymer in xylene. It is a resin solution used for the production of surface coatings.

Properties Suppliers
COLACRYL B611

COLACRYL B611 is a polymer based on methyl methacrylate and 2-ethylhexyl acrylate containing peroxide. It is used for the manufacture of dental and medical products.

Properties Suppliers
COLACRYL CRG107

COLACRYL CRG107 is a polymer based on methyl methacrylate and dimethylaminoethyl methacrylate. It is used for the manufacture of inks, paints and varnishes. It is also used in the manufacture of composites.

Properties Suppliers
COTBOX

COTBOX is a phenol formaldehyde resin which is activated by Isocynates & Catalysed by amine gas. The system is humidity resistant & water based coatings can be used without any problems on cold box cores. High productivity due to faster curing rate. The properties are it has energy savings as no heating is required, it has excellent dimensional accuracy as core is cured in the core box itself, it cores are ready for assembly immediately after stripping, it has excellent surface finish and breakdown properties.

Properties Suppliers
COTRAN

COTRAN is a acid cured furan resin. This is 2 part acid cured system used for large mould & cores in C.I., S.G. Iron & steel foundries. The benefits are it has faster rate of curing hence higher productivity, it has excellent hot strength, allows it to be used for steel, ductile, CI and even for non ferrous casting, it has excellent surface finish and collapsibility, it has reclamation of sand up to 95% is possible and use of reclaimed sand leads to reduced binder additions and further has excellent flowability of sand facilitates easy production of intricate cores and moulds.

Properties Suppliers
COTSET

COTSET is a phenol formaldehyde resin which is activated by ester. It is used for making mould & cores production suitable for ferrous steel & nonferrous casting. COTSET PART A is a highly alkaline phenolic resin. COTACT PART B is an ester. The benefits are it has excellent dimensional accuracy, it has high mould & core strength, it has good breakdown properties, it has low emission of fumes during pouring, it has superior casting finish, it has good resistence to sagging and further has faster rate of production.

Properties Suppliers
COTSOL

COTSOL is an acid cured Phenol formaldehyde resin. This is two part acid cured cold set system used for production of large mould and cores in ferrous and non ferrous casting. Conventional alkyd resin system require higher setting time up to 70-80 minutes, whereas COTSOL has faster setting time up to 45 - 50 minutes which enables production of mould at faster rate. It has good hot strengths compared to alkyd binder systems, hence minimum metallurgical defects.

Properties Suppliers