Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

Glycoluril

Glycoluril is the heterocyclic nitrogen containing compound, mainly uses as the bactericide Tetrachloroglycine urea, flame retardant agent of synthetic materials and slow-release nitrogen fertilizer, used in the synthesis of Glycoluril resin, other glycoluril derivatives.

Properties Suppliers
HETRON 922

HETRON 922 is epoxy-Vinylester resin with F-cat technology, very resistant to corrosion, impact, and with high elongation. F-cat permits low foam and exothermal temperature control when the resin is catalyzed. HETRON 922 is used in the mining and cellulose industry. It may also be used in applications in contact with food. Accepted by the FDA, Title 21 CFR 177.2420. Applications: manual molding, spray and filament winding.

Properties Suppliers
HETRON 922 INF

HETRON 922 INF is epoxy-Vinylester resin of low viscosity formulated for RTM, vacuum infusion and filament winding. This resin has F-Cat technology (flexible catalytic activity) and its raw materials are listed as accepted by the FDA regulations. HETRON 922 INF has excellent mechanical properties and resistance against corrosion.

Properties Suppliers
HETRON 980/35

HETRON 980/35 is epoxy vinylester resin containing less than 35% of styrene monomer. It contains F-Cat technology. With a high resistance against acids, solvents, flexion and heat. HETRON 980/35 may be used for manual lamination, spray-up and filament winding.

Properties Suppliers
HETRON D1222

HETRON D1222 is a vinylester resin of medium viscosity and highly reticulated. It is very resistant to heat and corrosion through solvents and acids. Excellent for the pultrusion process as it is a rapid tensile strength resin, resistant to heat. HETRON D1222 shows less wear and tear and maintains controlled exotherm. It may also be used for coating and lining compounds with filling.

Properties Suppliers
HETRON FR 992

HETRON FR 992 is epoxy vinylester low-viscosity resin, flame retardant with F-Cat technology. HETRON FR 992 resin holds a flame expansion lower than 75, which defines it as class II of the ASTM E-84 Standard. When adding 3% of Antimony Trioxide, it has a flame expansion lower or equal to 25, i.e., Class I. With this resin, manually laminated tanks and sprayed-up tanks, pipes, pipelines, tubs, stackers, purifiers and other devices / equipment containing corrosive gases, vapors or fluids, may be manufactures, where a high degree of flame resistance is required.

Properties Suppliers
HETRON FR 992 INF

HETRON FR 992 INF is epoxy vinylester low-viscosity, flame retardant and halogen resin. The laminates manufactured based on this resin comply with Class II regarding flame expansion (ASTM E-84). HETRON FR 992 INF is also highly resistant to corrosion, with excellent mechanical properties and has F-Cat technology.

Properties Suppliers
HETRON FR 992 SB

HETRON FR 992 SB is epoxy vinylester low-viscosity fire-retardant resin with F-Cat technology. The laminates manufactured with this resin comply with Class I of the ASTM E-84 regulations without the need for adding Antimony Trioxide. HETRON FR 992 SB also has excellent resistance against corrosion in acid and alkaline environments. HETRON FR 992 SB may be used in filament winding, manual lamination or spray-up processes to manufacture all kinds of equipment where a high flame-retardant degree is required.

Properties Suppliers
HETRON FR 998/35

HETRON FR 998/35 resin is a low viscosity, unpromoted, flame retardant epoxy vinyl ester. It can be used for corrosion resistant, reinforced thermosetting plastic equipment including filament wound, hand lay-up and spray-up tanks, pipes, ducts, stacks, scrubbers, linings or other equipment handling corrosive gases, vapors or liquids where a high degree of flame retardancy is required. The product is well suited for the caustic/chlorine and power industry applications.

Properties Suppliers
HYDREX 100 HF

HYDREX 100 HF is veinylester Epoxy resin of low emission of volatile material and low water absorption. It has variable gel times and excellent mechanical properties and impact resistance. HYDREX 100 HF resin was designed for manufacture of molds, vehicle and vessel parts, among other.

Properties Suppliers