Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
AROPOL 7241 T-15 resin is a thixotropic, promoted, corrosion resistant isophthalic polyester resin. The resin has excellent corrosion resistance, high strength and high heat deflection temperature. It can be used for hand lay-up and spray-up applications such as fabrication of fume hoods and ducts, tanks, pipe, storage tank repairs and linings in applications where corrosion resistance and FDA food application resins are required.
BC Antifoam C100 is a 100% active silicone compound. It is a highly effective antifoam used in a wide variety of both aqueous and non-aqueous foaming systems.
BC Antifoam C133 is a 100% active silicone compound. It is a highly effective antifoam used in a wide variety of both aqueous and non-aqueous foaming systems.
Benzoyl chloride is an organochlorine compound. It is mainly useful for the production of peroxides but is generally useful in other areas such as in the production of dyes, perfumes, pharmaceuticals, and resins.
Carbon disulfide is a colourless, toxic, highly volatile and flammable liquid chemical compound.Volcanic eruptions and marshes releases small amount of carbon disulfide.It is more reactive toward nucleophiles and more easily reduced.It is widely used in the synthesis of organosulfur compounds such as metham sodium.It is also used for an insecticide,solvent for phosphorus, sulfur, selenium, bromine, iodine, fats, resins,rubbers, and manufacture of viscose rayon, cellophane film, carbon tetrachloride.
DERAKANE 441-400 epoxy vinyl ester resin is a lower styrene-content resin that has an optimised epoxy backbone and resulting superior thermal properties and corrosion resistance performance. The resin is recommended for fabricating FRP storage tanks, vessels, ducts and particularly used in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers. Equipment fabricated with this resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence.
DERCOLYTE TS 105 is produced from the copolymerisation of terpene and styrene. It is a very light colored tackifying resin showing excellent adhesive performances with block copolymers. DERCOLYTE TS 105 is particularly recommended in Hot Melt pressure sensitive adhesives formulations.
DERTOPHENE T 105 is a light colored terpene phenolic resin compatible with various elastomers, resins and waxes. DERTOPHENE T 105 allows to improve the properties of Hot Melt or solvent adhesives such as specific adhesion, hot tack or flexibility.
DERTOPHENE T 115 is a light colored terpene phenolic resin compatible with various elastomers. DERTOPHENE T 115 is suitable for solvent based and Hot Melt based adhesives.
DERTOPOLINE P135 is a polymerized rosin esterified with pentaerythritol that shows a high softening point. DERTOPOLINE P13 is particularly recommended to increase the heat resistance of certain Hot Melt adhesives, Pressure Sensitive Adhesive and Solvent Base Synthetic Rubber Adhesive.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder