Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

Lithopone

Lithopone is a white pigment, a mixture of barium sulfate and zinc sulfide. It is widely used for the white paint such as polyolefin, vinyl resins, ABS resin, polystyrene, polycarbonate, nylon, POM, plastic, paint and ink. It is also used for the coloration of the rubber, cloth, leather, paper, colored enamel, etc.

Properties Suppliers
Lotek Ionomers Resins

Lotek ionomers are very similar to those used in the molding of low density polyethylene (LDPE) and other ethylene copolymers.Ionomers are hygroscopic and will absorb sufficient moisture to cause molding problems.

Properties Suppliers
Lumiflon

Lumiflon is a solvent-soluble fluoropolymer for coatings that can be cured under room temperature conditions.

Properties Suppliers
Luperox K1

Luperox K1 is a standard methyl ethyl ketone peroxide used for the cold cure of unsaturated polyester resins at room temperatures in combination with a cobalt accelerator.Luperox K1 is recommended for the curing of ortho- and isophthalic, Bisphenol-A or neopentyl-glycol resins at temperatures between 15 and 50°C.

Properties Suppliers
MADURIT MW 150 liquid

MADURIT MW 150 liquid is a modified melamine formaldehyde resin which is non ionic used in pulp & paper industry. Its cationic formulation suitable for wet strength finishing of paper and paperboard in the stock. If Madurit MW 150 liquid is added to dilute acid the resin will convert into its cationic form, ready to be used for wet end addition. It imparts excellent mechanical properties in the wet state such as wet tensile, burst strength and abrasive resistance as well as alkali resistance.

Properties Suppliers
MADURIT MW 167 WA

MADURIT MW 167 WA is a cationically charged liquid that is ready for use and to be added directly to the pulp. It is a colloidal solution of a melamine-formaldehyde condensation product containing acid in order to provide its cationic form. It is used as a crosslinking agent to produce papers which have excellent mechanical properties in the wet state such as wet tensile, burst strength and abrasive resistance.

Properties Suppliers
MADURIT MW 168 WA

MADURIT MW 168 WA is an aqueous solution of a cationic melamine resin with very low content of free formaldehyde. It is used as a crosslinking agent to produce papers which have excellent mechanical properties in the wet state such as wet tensile, burst strength and abrasive resistance. The product is heat and light stable. It does not contribute to yellowing.

Properties Suppliers
MADURIT XT 800w/50WA

MADURIT XT 800w/50WA is a nonionic, modified, highly methylolated melamine resin with high degree of etherification. It is used as crosslinking agent for low formaldehyde pigment printing. Its effectiveness is particularly evident on prints on woven or knitted fabrics made of synthetic materials, regenerated cellulose and blends of these fibers with cotton.

Properties Suppliers
MADURIT XT 836w/75WA

MADURIT XT 836w/75WA is partially etherified melamine resin used as crosslinker for polymer dispersions, consolidation of fabrics and fleeces, stiffening of non-woven products. It may also be applied as a binder for the manufacture of glass fleeces with excellent strength, temperature resistance and light fastness.

Properties Suppliers
MDC704i

MDC704i HYPERSPERSE ANTISCALANT

Properties Suppliers