Buy resin chemicals | polymer chemicals | resin chemical manufacturers | resins chemicals suppliers - Worldofchemicals

chemical-categories

Polyamide

Polyamide is a macromolecule with repeating units linked by amide bonds. Polyamides occur both naturally and artificially. Polyamides are easily copolymerized, and thus many mixtures of monomers are possible which can in turn lead to many copolymers. Polyamides have excellent mechanical properties and can be either hard and tough or soft and flexible. Polyamides are commonly used in the textile and automotive industry.

Properties Suppliers
Polycol-Fbeco

Polycol-Fbeco is used in resins and polymers.

Properties Suppliers
Polyethylene Polyamines

Polyethylene Polyamines is a mix of amines of a various molecular mass, general formula - H2N [-CH2CH2NH-]nH. It is explosion-proof and hard ignitable. Polyethylene Polyamines is well dissolved in a water and spirit, it swallows a moisture and CO2 from an air and have a specific odor. It is used in production of ion-exchange resins, additives, as a hardener of epoxy resins.

Properties Suppliers
Polyisobutylene Succinic Anhydride

Polyisobutylene Succinic Anhydride is used for preparation of polyisobutylene diene and polyene succinimide and bononize ashless dispersant.

Properties Suppliers
Polymer- KV

Polymer- KV is used in wash and wear resin with catalyst.

Properties Suppliers
Polystyrene

Polystyrene is an aromatic polymer made from the aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic. It is a thermoplastic substance, which is in solid (glassy) state at room temperature, but flows if heated above its glass transition temperature, and becomes solid again when cooled. Pure solid polystyrene is a colorless, hard plastic with limited flexibility. It can be cast into molds with fine detail. Polystyrene can be transparent or can be made to take on various colors.

Properties Suppliers
Polytrimethylene Terephthalate

Polytrimethylene terephthalate is a polymer synthesized and patented in 1941. It is produced by a method called condensation polymerization or transesterification. The two monomer units used in producing this polymer are: 1,3-propanediol and terephthalic acid or dimethyl terephthalate. Similar to polyethylene terephthalate, the PTT is used to make carpet fibers.

Properties Suppliers
Polyvinyl Butyral

Polyvinyl butyral is a resin usually used for applications that require strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility. It is prepared from polyvinyl alcohol by reaction with butyraldehyde. The major application is laminated safety glass for automobile windshields.

Properties Suppliers
Prifac fatty acids

Pritac fatty acid encompasses distilled, saturated and unsaturated products of different origins, such as soya, sunflower, rapeseed, tallow, palm and coconut as well as branched, modified fatty acids.

Properties Suppliers
Propyl Acetate

Propyl Acetate is a clear, volatile, mobile liquid with a characteristic odour reminiscent of acetone. It is miscible with many common solvents, e. g. alcohols, ketones, aldehydes, ethers, glycols and glycol ethers, but it is only sparingly soluble in water. Propyl Acetate is primarily intended as a solvent in the coatings, printing inks industries,cellulose esters,resins,plastics. Its properties are important for the manufacture and processing of numerous products in these branches of industry. Propyl Acetate is formed by the esterification of acetic acid and 1-propanol, often via Fischer-Speier esterification.It has good solvency power for many natural and synthetic resins.

Properties Suppliers