Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Lotek ionomers are very similar to those used in the molding of low density polyethylene (LDPE) and other ethylene copolymers.Ionomers are hygroscopic and will absorb sufficient moisture to cause molding problems.
MADURIT MW 150 liquid is a modified melamine formaldehyde resin which is non ionic used in pulp & paper industry. Its cationic formulation suitable for wet strength finishing of paper and paperboard in the stock. If Madurit MW 150 liquid is added to dilute acid the resin will convert into its cationic form, ready to be used for wet end addition. It imparts excellent mechanical properties in the wet state such as wet tensile, burst strength and abrasive resistance as well as alkali resistance.
Methacryloyl chloride is the acid chloride of methacrylic acid. It is used to manufacture polymers.
OCTAL PET RESIN GP 01 is produced using the latest state-of-the-art 2R direct high I.V. technology. This advanced technology ensures that the properties and quality of PET resin are superior with low crystallinity and low AA generation, making it the preferred choice for a number of applications. OCTAL PET RESIN GP 01 is suitable for a variety of applications including water, carbonated soft drinks,alcoholic beverages, edible oils, and pharmaceutical containers.The resin is designed and engineered to provide high dimensional strength and mechanical properties. The low crystallinity and heat of fusion of the resin, provides unique advantages of low residual acetaldehyde generation in injection molding and also lower energy for conversion into bottles. The spherical pellets of the resin ensures smooth conveying in long pipelines with near zero fines generation. The uniform spherical surface allows for easy flow of air around the PET pellets and helps in consistent drying at lower temperatures, saving valuable energy.
Struktol Polydis 3615 is a low chlorine version of Struktol Polydis 3614 with low viscosity. It is designed for electronic applications. It is especially suitable for the production of potting resin or composites with superior properties.
Super absorbent resin is used in the preparation of organic synthetic and polymer, soluble in most organic solvents like water, ethanol, and ether.
Triethylenetetramine is an organic compound. It is used as a crosslinker in epoxy curing, lubrication-oil additives, marine protective coatings, polyamide resins. It can also be used as a depressant for pyrrhotite and arsenides in copper and nickel mineral flotation.
Trimellitic Anhydride is used in the production of resins for electrode-position and powder coatings, and as a binder for glass fibres, and other aggregates. It is used as an embossing agent for vinyl flooring and as a curing agent for epoxy resins. It is also used as an intermediate for the synthesis of surface coatings chemicals, adhesives, polymers, dyes printing inks, pharmaceuticals and agrochemicals.
Trimethylolpropane is the organic compound with the formula CH₃CH₂C(CH₂OH)₃. This colourless solid is a triol. Containing three hydroxy functional groups, TMP is a widely used building block in the polymer industry.
Uni-Gel S.C. 90 Resin with TP-41F Hardener is a white, room temperature cure, epoxy surface coat.It has good bonding properties, holds well on vertical surfaces and its viscosity allows it to be easily measured through a dispenser.Uni-Gel S.C. 90 Resin is highly recommended for plastic faced plasters and renders a hard surface.This system is also available in a thin version suitable for spray applications.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder