chemical-categories

Methyl Isobutyl Ketone

Methyl isobutyl ketone is an organic liquid, a ketone, is widely used as a solvent. Methyl Isobutyl Ketone is used as a solvent for gums, resins, paints, varnishes, lacquers, and nitrocellulose, as an alcohol denaturant, in the extraction of rare metals, and as a synthetic flavoring adjuvant. It is an active solvent for many synthetic resins including cellulosics, vinyl copolymers, acrylics, alkyds, polyesters, and epoxies,extraction agent in the dewaxing and deoiling of petroleum products. It is also used in the manufacture of germicides, fungicides, pharmaceuticals, electroplating solutions, and as a denaturant in many ethanol formulations. It is very useful in developing high-solids coatings because of its combination of high solvent activity and low density.It is used in the semiconductor industry. It has been shown to be a slight dermal irritant and can be expected to be no more than moderately irritating to eyes. In several studies with human volunteers exposed to up to 200ppm, it caused reversible irritative and central nervous system symptoms.

Nexxstar Low EVA Resin

Nexxstar low EVA resin is a co-polymer of Ethylene and Vinyl Acetate. Nexxstar low EVA resin form the basis of innovative co-extrusion film solutions that provide exceptional performance for securing palletized products during transport and storage.

Terephthaloyl Chloride

Terephthaloyl chloride is the acid chloride of terephthalic acid and is one of two monomers used to make Kevlar, the other being p-phenylenediamine. It is used as a key component in performance polymers and aramid fibers, where it imparts flame resistance, chemical resistance, temperature stability, light weight, and very high strength. It is also an effective water scavenger, used to stabilize isocyanates and urethane prepolymers.

Tert-Butyl Perbenzoate

Tert-Butyl Perbenzoate is an active source of free radicals.It is suitable for heat-curing of unsaturated resins.It is also used as a cross-linking agent for natural and synthetic rubber, silicone rubbers and polyethylene,drying accelerator for paints and varnishes,mild oxidizing agent in organic reactions.

cis-1,2-Dichloroethene

cis-1,2-Dichloroethene is used as a solvent for waxes, resins, polymers, fats, and lacquers. It is also used as an intermediate in the preparation of other chlorinated solvents.

petroleum Purified 99%

Heavy Aromatic Solvents

Heavy Aromatic Solvents Napthalene Depleted Series

Heavy Molecule Aromatic Solvent

Mixed Aromatics Solvents

Paraffinic Products

Glycols

Fuels

#1110 Vinyl Ester Resin

#1110 Vinyl Ester Resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. The properties of this resin allow it to withstand impacts and repeated flexing without developing cracks. It has a low viscosity, making it perfect for resin infusion applications. It can also be used for hand lay-up or spray applications that require excellent corrosion resistance, impact strength, and tensile elongation.

2,4-Di-Tert-Butylphenol

2,4-Di-tert-butylphenol is a raw material for phosphite anti-oxidants.2,4-Di-Tert-Butylphenol primarily used in the manufacture of polyolefins.

Delta Starlite 713 EPIS

Delta Starlite 713 EPIS is a two component, low viscosity injection grout resin for grouting to cracklines in concrete and hollowness in floor screed and wall plaster.

Epilox Hardener H 12-01

Epilox Hardener H 12-01 is a modified polyaminoamide epoxide adduct. It is a solventless, yellowish liquid and can be used to emulsify liquid epoxy resins in water. It has a viscosity at 25 Celsius (mPa·s) of 13000 - 23000 and an amine equivalent weight of 185 grams. Epilox Hardener H 12-01 is used as an emulsifying curing agent in formulations with liquid epoxy resins for aqueous primers, paintings, and coatings.