Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
PT AQUA 7613 Polyacrylic acid and Phosphonates based RO Antiscalant. This product compatible with all membrane types and effective over a wide pH range. PT AQUA 7613 helps in crystal modification distorts inorganic salt crystal growth and reduces system fouling.This product can achieve threshold scale inhibition at low dose rates offers excellent economical running costs.
PT AQUA 8204 is a cleaning chemical for Thin Film Composite Membranes and Filters.This product compatible with thin film composite membranes.PT AQUA 8204 gives superior results in the removal of organic & colloidal foulants,especially when compared to generic formulations.PT AQUA 8204 contains a specialized blend of buffers & other ingredients to dissolve organic foulants, & disperse colloidal particles.Our product highly buffered to resist pH changes during the cleaning process.
PT AQUA 8205 Anionic Surfactant based Membrane Cleaner and Filters.Our product suitable for use with polyamide thin film composite and cellulose acetate membranes. PT AQUA 8205 applied for an effective removal of organic matter.PT AQUA 8205 is a high level of active substance and liquid product, easy to handle and simple to apply.
PT AQUA 8306 is an alkyl Benzene Sulphonic acid based Membrane Cleaner.It can be diluted and is fully miscible with water in all proportions. The low dose rate of PT Aqua 8306 ensures cost effective use and it is an excellent adjunct when used in combination with other PT Aqua membrane cleaners. PT AQUA 8306 is indicated for removal of severe Organic Foulants.
AQUABLEND-902 is designed formulation of antisclant for the feed water with higher levels of silica and metal oxides.It effectively controls calcium,strontium,barium scales providing optimum control of feed water with concentrated Silica level up to 280 ppm. Aquablend-902 dispersed slit and colloidal particles thereby keeping membrane clean. It is also non corrosive liquid miscible with water.
AQUABLEND-921 is designed formulation of cleaners for the effective removal of carbonates , metal oxide and sulfate scales of barium , strontium and calcium in reverse osmosis system.It should be stored in an air tight container away from direct heat.
Ameztreat-720 is an alkalinity builder. It also contains organic dispersants and antifoam. Ameztreat-720 is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters.Ameztreat-720 is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. Ameztreat-720 may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant).
Memkleen 4020 has been developed as a general purpose membrane cleaner. It is effective against most organic foulants typically found in reverse osmosis systems.Memkleen 4020 is effective against aluminium based foulants.
AQUACARE-A-101 s a broad spectrum antiscalant designed to inhibit formation of inorganic scales in membrane separation processes.It is highly effective on R.O. feed water having a high calcium sulfate scaling potential.AQUACARE-A-101 stops crystal growth of calcium sulfate scale.It often surpasses the performance of other antiscalants under stressed conditions of high pH,effectively stabilizes metal ions to prevent fouling of the membrane.AQUACARE-A-101 is environmentally compatible.
AWC A-102 PLUS is a broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes.It inhibits calcium carbonate scale up to an LSI of 2.6.AWC A-102 PLUS effectively inhibits formation of calcium sulfate, calcium phosphate, calcium fluoride, barium sulfate, strontium sulfate and silica, and stabilizes metal ions to prevent metal oxides precipitation and disperses existing metal oxides/hydroxides, silt and clay particles.
Stay updated with the latest chemical industry trends and innovations.
Verification Code has been sent to
Please enter the Verification Code below to verify your Email Address.If you cannot see the email from "noreply@worldofchemicals.com" in your inbox,make sure to check your SPAM Folder