Make your products visible globally with Elite Membership.
I agree to the terms and conditions
Existing User?
Sign In with Email
Remember Me Forgot Password?
New User?
Enter your registered Email ID to get reset password.
Elite Member
Individual Register
Deoflow Z is a universial processing additive for rubber compounds based on EPDM, NR, SBR and CR, in which zinc-containing processing additives could cause interferences, as well as for complex mouldings. It acts as lubricant and dispersing agent. It improves the flow properties of the compounds and the release of the vulcanizates.
Deogum 194 is a processing additive for special elastomers. It facilitates the processing of special elastomers such as HNBR, ACM or ECO. Flow properties and mold-filling are improved by reduced mooney-viscosity. Deogum 194 optimizes the processing and release properties of the compound on the mixing devices as well as in the downstream processes.
Deogum VP 294 is a processing additive based on organosilicone compounds for special elastomers such as FPM, HNBR, ACM, and ECO. It improves the flow properties and mold-filling by reducing the Mooney viscosity. It also eases the mold release and provides a smooth surface. It is suitable for high performance elastomers that are difficult to process.
Deosol H is a plasticizer for the dispersion of carbon black and light color filler. It also facilitates the processing of rubber compounds during calendering and extrusion.
Deovulc ATP-70 is an amine-activated Dithiophosphate, absorbed on a silica carrier system. It is designed to enable a rapid cure of EPDM and diene rubber, and is generally applied in combination with additional accelerators like thiazoles or sulphenamides. The use of Deovulc ATP-70 leads to a high level of cross-linking density and consequently to vulcanizates with low compression sets and excellent heat ageing.
Deovulc OH is used as an acid scavenger and crosslinking activator in fluorocarbon polymers. The fineness of Deovulc OH provides high activation and spotless dispersion.
Deovulc OTOS-80 is a highly effective sulphenamide accelerator of dithiocarbamyl type as non-dusting soft granules. It is used for rubber compounds with high requirements on reversion stability, very good resistance against oxidation and low compression set due to formation of short sulphur cross-links. It has proven to be very effective for antivibration applications.
Deovulc ZO acts as an activator for the vulcanization of natural rubber. The high solubility of Deovulc ZO often provides higher cross-linking density, which leads to improved compression set and dynamic properties.
Deovulc ZO DL is a vulcanization activator, mainly for natural rubber. It is added together with the filler, and can partly or fully replace stearic acid. It may also be used in dien-rubber other than natural rubber, except CR.
Dicumyl Peroxide is mainly used as crosslinking agent for EPDM rubber, NR, etc.as vulcanizing agents for NBR rubber and PE resin. It should be stored in the dry well-ventilated warehouse below 38. during transportation it should be prevented from sun explosure, shock, collision and heat.
Stay updated with the latest chemical industry trends and innovations.