Buy Rubber Industry Chemicals | Rubber Chemicals Manufacturers | Rubber Chemical Suppliers - Worldofchemicals


Millathane 5004

Millathane 5004 is a peroxide curable polyester millable urethane rubber. It has excellent processing characteristics and can be injection molded easily. In addition to excellent abrasion resistance, Millathane 5004 has the highest stress strain values of all peroxide cured polyurethanes. The cured stock has excellent tear strength, excellent low temperature flexibility and resistance to oxygen, ozone, fuels and oils.

Properties Suppliers
Mixgran OBSH-75

Mixgran OBSH-75 is organic blowing agent for the manufacture of sponge and foam rubber articles based on natural and synthetic rubbers.

Properties Suppliers
Mixslab ZBOP-50

Mixslab ZBOP-50 is an anti-reversion curing agent for sulfur cured NR and diene rubbers. It is a secondary accelerator blending with sulphenamides or thiazol. The vulcanizates have excellent heat resistance and anti-reversion performance.

Properties Suppliers

Polychloroprene is a family of synthetic rubbers that are produced by polymerization of chloroprene. It has good chemical stability, and maintains flexibility over a wide temperature range. It is used in a wide variety of applications, such as laptop sleeves, orthopedic braces, electrical insulation, liquid and sheet applied elastomeric membranes or flashings, and car fan belts.

Properties Suppliers
Propylene Imine

Propylene imine is used as an intermediate in the paper, textile, rubber, and pharmaceutical industries.

Properties Suppliers
Rhenosin W 90 B

Rhenosin W 90 B is a plasticizer to improve the low-temperature flexibility of elastomer vulcanizates. It is used to achieve optimum low temperature flexibility in molded and extruded products. It disperses easily in a wide range of elastomers. It is not affected by vulcanization and does not degrade the physical characteristics of the compound. It is widely used in fuel pipes, wire sheathing, sponge rubber, extruded and molded technical rubber components.

Properties Suppliers

STRUKTOL KW 400 is an easily soluble plasticizer in aliphatic and aromatic hydrocarbons to improve the low temperature flexibility with all commonly used rubbers. NBR vulcanizates can be compounded with flexibility at temperatures as low as -55ºC.

Properties Suppliers

STRUKTOL WB 300 is a special purpose synthetic plasticizer mainly used in compounds based on nitrile rubber. It is used in NBR, ECO and ACM to improve oil and fuel resistance. Due to its incompatibility with aliphatic hydrocarbons, minerals, oils and greases, it will not leach from vulcanizates, which means that hardly any hardening or shrinkage of the vulcanized rubber is experienced. It is highly compatible with phenolic resin modified NBR/PVC polyblends.

Properties Suppliers

Tert-Butylamine is used in the manufacture of rubber chemicals, pharmaceuticals, agricultural chemicals and oil refining products.

Properties Suppliers

Tri-n-amylamine is used as an intermediate in the manufacture of pharmaceuticals, quaternary ammonium compounds, agrochemicals, surfactants, lubricant additives, corrosion inhibitors, vulcanization accelerators and dyes.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X