Buy Rubber Industry Chemicals | Rubber Chemicals Manufacturers | Rubber Chemical Suppliers - Worldofchemicals

chemical-categories

SAF-119

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-120

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-121

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-129

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-132

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-139

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction.

Properties Suppliers
SAF-201

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction. SAF-201 is designed for non-aqueous systems.

Properties Suppliers
SAF-202

SAF Antifoams are carefully formulated antifoams based on dimethylsiloxane fluid. These antifoams are specifically formulated to prevent foams from forming and keep the system non-foaming with a quick knock down reaction. SAF-202 is designed for non-aqueous systems.

Properties Suppliers
SANTOWEB DX

Santoweb DX a treated cellulose fiber product, provides reinforcement for uncured and cured rubber compounds, increases product stiffness and reduces cut growth rate in NR, SBR, BR, and CR compounds. Santoweb DX increases elongation and compression stress levels of rubber compounds. It increases compound green strength, reduces die swell and cold flow. Santoweb DX discolors because it is black, but does not cause compound staining. Santoweb DX can be used for tire tread compounds for highway truck and OTR applications, tire bead wrap, power transmission belts, uncured roof sheeting, and static rubber articles requiring cut growth resistance. Santoweb DX is regulated for use in articles in contact with food as specified under BgVV XXI, Category 4. Santoweb DX is not regulated for use in FDA food contact applications. Store Santoweb DX in single stacked pallets in a cool, dry, well ventilated area, avoiding exposure of the packaged product to direct sunlight. Santoweb DX fibers tend to absorb moisture that can be removed by exposure to moderate heat. Temperature during heat treatment should not exceed 110 °C.

Properties Suppliers
SANTOWEB H

Santoweb H, a treated cellulose fiber product, provides reinforcement for uncured and cured rubber compounds, increases product stiffness, and reduces cut growth rate in EPDM and IIR compounds. Santoweb H increases modulus in both stress and compression mode of EPDM and IIR compounds. It should be used with a melamine donating chemical for applications in which adhesion of the fiber to the rubber matrix is critical. Santoweb H increases green strength, reduces die swell and cold flow. Santoweb H discolors because it is black, but does not cause compound staining. Santoweb H can be used for low pressure hoses, gaskets, and diaphragms. It increases modulus in both stress and compression mode of EPDM and IIR compounds. Santoweb H should be stored in single stacked pallets in a cool, dry, well ventilated area, avoiding exposure of the packaged product to direct sunlight.

Properties Suppliers