Buy Rubber Industry Chemicals | Rubber Chemicals Manufacturers | Rubber Chemical Suppliers - Worldofchemicals

chemical-categories

ULTRA-FLOW 800

ULTRA-FLOW 800 is a very effective dispersing agent for white fillers. It is particularly effective in highly loaded silica compounds.

Properties Suppliers
ULTRA-FLOW™ 700S

ULTRA-FLOW™ 700S is a very effective dispersing aid for white fillers. It is particularly effective in highly loaded Silica compounds.

Properties Suppliers
ULTRANOX 626

ULTRANOX 626 is a kind of high-effective solid phosphite ester antioxidant, which is super than other phosphite ester in the effective protection on polymers' color. It always blended with phenolic principal antioxidant to prepare composite antoixdant, which can imporve the thermo-stability of polymer processing.

Properties Suppliers
VULCOFAC ACT 55

VULCOFAC ACT 55 is made up of 1,8-diazabicyclo[5.4.0]undec-7-en (DBU) and saturated dibasic acids on an inert carrier and used as crosslinker for rubber.

Properties Suppliers
VULCOFAC F45

VULCOFAC F45 is calcium hydroxide based activator for FKM compounds.

Properties Suppliers
Vistalon™

Vistalon™ ethylene propylene diene (EPDM) rubber is used in a wide variety of applications ranging from automotive hoses, belts and weatherseals to gaskets, roof sheeting and glazing seals to wire and cable insulation.

Properties Suppliers
Vulkalent® B/C

Vulkalent® retarders adjust the vulcanization rate and increase scorch and flow times of sulfur-cured diene rubber compounds. Currently available retarders function only in compounds cured with sulfur and accelerator, or, to a limited extent, in those cured with thiuram as crosslinking agent. They are not effective in peroxide cures, high energy radiation cures, metal oxide cures (e.g. CR) or resin cures (e.g. IIR). Retarders are important mainly for NR, IR, but also for SBR, BR (blends) and NBR. They are not needed for slow curing rubbers such as IIR or EPDM and are not suitable for CR.

Properties Suppliers
Vulkalent® E/C

Vulkalent® retarders adjust the vulcanization rate and increase scorch and flow times of sulfur-cured diene rubber compounds. Currently available retarders function only in compounds cured with sulfur and accelerator, or, to a limited extent, in those cured with thiuram as crosslinking agent. They are not effective in peroxide cures, high energy radiation cures, metal oxide cures (e.g. CR) or resin cures (e.g. IIR). Retarders are important mainly for NR, IR, but also for SBR, BR (blends) and NBR. They are not needed for slow curing rubbers such as IIR or EPDM and are not suitable for CR.

Properties Suppliers
Vulkalent® G

Vulkalent® retarders adjust the vulcanization rate and increase scorch and flow times of sulfur-cured diene rubber compounds. Currently available retarders function only in compounds cured with sulfur and accelerator, or, to a limited extent, in those cured with thiuram as crosslinking agent. They are not effective in peroxide cures, high energy radiation cures, metal oxide cures (e.g. CR) or resin cures (e.g. IIR). Retarders are important mainly for NR, IR, but also for SBR, BR (blends) and NBR. They are not needed for slow curing rubbers such as IIR or EPDM and are not suitable for CR.

Properties Suppliers
Vulkanol OT

Vulkanol OT synthetic plasticizers are required as active ingredients to adjust the properties of vulcanizates, for example, to reduce hardness, modulus and tensile strength or to increase ultimate elongation and resilience. As a processing aid, plasticizers reduce compound viscosity and improve flow during processing, which results in lower processing temperatures and power consumption.

Properties Suppliers