Buy Rubber Industry Chemicals | Rubber Chemicals Manufacturers | Rubber Chemical Suppliers - Worldofchemicals


magnesium oxide Purified ?99

MgO ≥99


We also can  customize up to your requests

Chlorosulfonated Polyethylene

Chlorosulfonated polyethylene is the base polymer for CSM synthetic rubbers. Chlorosulfonated polyethylene compounds provide excellent ozone, oxidation, sunlight, and weather resistance. They are also capable of providing excellent resistance to alkalis and acids.

Properties Suppliers

Di-Tert-Butoxydiacetoxysilane is mainly used as cross-linking agent for fast-cure room temperature vulcanized silicone rubber.


N-(Cyclohexylthio)phthalimide is a high effective pre-vulcanization inhibitor.It is applied in NR,SBR,BR,IIR,CR,EPM,EPDM,NBR with cure system consisting of sulfur and Thiazole but mainly Sulphenamide Accelerator.It is used in natural rubber and synthetic rubber. It may protect effectively the rubber material from scorching during Processing, so that to make it possible for extruder and calender to be running at a high temperature and high speed and improve the production the storage stabilizztion of the rubber material,protect natural vulcanization during storage.

Properties Suppliers
NITRIC ACID Technical 57-58%

SR NO.                      PARAMETERS            UNIT                         SPECIFICATION
01.                Appearance                                                          Clear Colourless Liquid
02.                Total Acidity (as HN03)            % w/w                            57% Min
03.                 Specific Gravity (at 25°C)                                            1.368 Min.
04.                 Nitrous Acid (as HN02)            ppm                                  70 Max
05.                 Chloride as Cl                          ppm                                  10 Max
06.                 Iron as Fe                                 ppm                                  18 Max
07.                 Arsenic (As AS)                        ppm                                  01 Max
08.                Sulphate as H2So4                   ppm                                  10 Max
09.                Heavy Metal as Pb                                                    To Pass the test

Zinc Dimethyl Dithiocarbamate

Zinc Dimethyl Dithiocarbamate is a dithiocarbamate. Flammable gases are generated by the combination of thiocarbamates and dithiocarbamates with aldehydes, nitrides, and hydrides. Thiocarbamates and dithiocarbamates are incompatible with acids, peroxides, and acid halides. Zinc bis dimethyldithiocarbamate is corrosive to iron and copper. Zinc bis dimethyldithiocarbamate is incompatible with strong oxidizing agents and acids. Zinc bis dimethyldithiocarbamate is also incompatible with mercury. Thio and dithiocarbamates slowly decompose in aqueous solution to form carbon disulfide and methylamine or other amines. Such decompositions are accelerated by acids. Insoluble in water.

Butylated hydroxyanisole (BHA)

BHA is as an antioxidant and preservative in food, food packaging, animal feed, and cosmetics, and in rubber and petroleum products. BHA also is commonly used in medicines, such as isotretinoin (known as Accutane/Roaccutane), lovastatin, and simvastatin, among others.HANGZHOU GULF

Properties Suppliers
MBT(M) 2-Mercaptobenzothiazole

It is a moderately fast curing primary accelerator used in both dry rubber (natural and synthetic rubbers) and latex applications. Low temperature curing can be achieved in combination use with secondary accelerators, such as N,N'-diphenylguanidine, tetramethylthiuram disulfide, tetraethylthiuram disulfide. Vulcanizates obtained with MBT tend to have a relatively low modulus, but keep good aging properties. It is also used in latex foam curing systems. It is not recommended to be applied in rubber products connected with beverage and food due to bitter taste.

1,6-Hexanediol Diglycidyl Ether

1,6-Hexanediol Diglycidyl Ether is used as a general purpose diluter to reduce viscosity of epoxy resins. It can be found in coatings, adhesives, laminates, foams, rubbers chlorinated vinyl resins.

Properties Suppliers
17.5% Potassium Oleate Solution

17.5% Potassium Oleate Solution is used as Surfactant solution and Latex stabiliser.Under acid conditions may decompose to non-hazardous products.It easily reacts with strong oxidising agents,strong acids and strong bases.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X