Buy speciality chemicals | speciality chemicals manufacturers | speciality chemicals suppliers - WorldOfChemicals

chemical-categories

Flexatrac DME

Flexatrac DME is an excellent solvent for many applications. Ascend offers several grades and mixtures of FlexaTrac-DME, ranging from highly purified grades to specific mixtures of two or three ester components. FlexaTrac DME (dimethyl or dibasic esters) is a clear, colorless, low-odor liquid produced by reacting methanol with streams of adipic, glutaric and succinic acids and then separated via fractionation. FlexaTrac-DMEs provide attractive alternatives to other solvents Low volatile organic compounds, Biodegradable and High solvency power.

Properties Suppliers
GAIN

GAIN is a complexed carboxylic acid based bio stimulant which provides an assured performance and better yield enhancement. The important merits are it acts as anti stress & stimulator for plant, it champions vigorous plant growth, it turns down dropping of fruits and causes abundant flowering, it boosts resistance against diseases and pest attacks, it positively impacts upon the quality as well as the quantity in terms of the crop yield and further it musters endurance in the face of stressful conditions like climatic changes and scorching.

Properties Suppliers
Gallium Acetate Industrial Grade 99%

Gallium acetate is colorless or white crystalline powder or lump. It is a kind of important gallium salts. Normal compound is gallium acetate hydrate, however gallium acetate anhydrous is available. It is rare comparing to other gallium compounds as gallium oxidegallium chloridegallium nitride and gallium arsenide, because its uses are not specific.

Gallium Acetate

Synonyms: Gallium(III) actetate, Gallium Triacetate, Ga(C2H3O2)3, Gallium(3+) Acetate, G

CAS No.: 2571-06-4 Molecular Formula: C6H9GaO6 Molecular Weight: 246.85386 EINECS No.: 219-915-3

 

Properties Suppliers
Hafnium Oxide Industrial Grade 99.9%

Hafnium oxide is white powder. It is stable at room temperature and room pressure. It is insoluble in water. The evaporation conditions of hafnium dioxide is using electronic gun with oxygen partial pressure 1~2*10-2Pa, evaporation temperature 2600~2800℃, substrate temperature 250℃ and evaporation rate 2nm/2. Hafnium metal is the raw material.

Hafnium Oxide

CAS No.:12055-23-1 EINECS No.:235-013-2 Molecular Formula:HfO2 Molecular Weight:210.49
Melting Point:2181℃ Density:9.68 Molar Mass:210.49g/mol  
Coefficient of Linear Expansion:5.6*10-6/K Evaporation Pressure: 1Pa at 2678℃, 10Pa at 2875℃
Thin Film Properties:220~12000nm Refractive Index:(250nm)~2.15 (500nm)~2

Applications

Hafnium(IV) oxide is a kind of evaporation coating material, which mainly apply to UV antireflection film and interference film.

Hafnium dioxide apply to spectral analysis, catalyst system and refractory materials.

Properties Suppliers
Holmium Metal Purified 99.9%

Holmium powder is dark gray fine particles, which has  unusual magnetic property. It is stable at room temperature and in dry air, however in dry air and high temperature, it is easy to oxidize. It is soluble in inorganic acid. Holmium metal can compound with various nonmetal elements nearly. It exists in gadolinite, monazite and other rare earth ores. Holmium chloride is the raw material. Ho can process into foil, sheet, rod, powder, wire and sputtering target. The ingot is of REM 99.99% by distillation method. Ho powder is of REM 99.9% and particle size -100mesh and -200mesh. There are two production method of holmium ingots, distillation method and reduction method. The distilled holmium piece is dendritic with higher purity than reduced one.

Holmium Powder

Purity: Ho/REM 99.9% 3N

CAS No.:7440-60-0 EINECS No.:231-169-0 Molecular Formula:Ho Molecular Weight:164.930
Melting Point:1474℃ Boiling Point:2695℃ Density:8.79  

Applications

Holmium metal powder can apply in material of highfield. It is raw material for producing magnetic alloys material.

Properties Suppliers
Hydrogenated Bisphenol A

Hydrogenated Bisphenol A is a saturated diol produced by catalytic reduction of Bisphenol A. It is used in the preparation of alkyd, polyester, and epoxy resins.

Properties Suppliers
I-Soap

I-Soap is a contact insect soap formulation that works by smothering and dehydrating insect. This disrupt the cell structure and permeability of their cell membrane and fungicide for the control of soft bodied insects like aphid, thrips, caterpillar, leafminer, mealybug, scale, mites, sprider, whitefly etc. I-Soap when used as a soil drench, can control root mealybugs. It also can prevent and control powdery mildew.

Properties Suppliers
Indium Chloride Industrial Grade 99%

Indium chloride is available with indium(III) chloride anhydrous and indium(III) chloride tetrahydrate, which are common indium salts. Indium(III) chloride anhydrous is white powder, which is soluble in water. Indium metal is the raw material. Indium(III) chloride tetrahydrate is white crystalline powder.When heating in air, it decompose to In2O3.

Indium Chloride

CAS No.:10025-82-8 EINECS No.:233-043-0 Molecular Formula:InCl3 Molecular Weight:221.18
Melting Point:586℃ Boiling Point:300℃ Flash Point:300℃ Density:3.46
CAS No.:22519-64-8 EINECS No.:233-043-0 Molecular Formula:InCl3.4H2O Molecular Weight:293.24
Melting Point:56 UN3260 8/PG 2    

Applications

Indium(III) chloride anhydrous is spectral purity reagent and high purity chemical reagent. Dilute indium trichloride solution spray on grass feed that is as growth promoter of fleece.

Properties Suppliers
Indium Iodide Industrial Grade 99.9%

Indium iodide is yellow solid, which is an indium salt. Its fused salt is almost black. It is stable at room temperature and room pressure., which is also stable to water and acid. Indium and mercury iodide are the raw material. There is also another method, which need indium and indium triiodide as raw material. Indium triiodide is available too.

Indium Iodide

CAS No.:13966-94-4 EINECS No.:237-746-3 Molecular Formula:InI Molecular Weight:241.72
Melting Point:351℃ Boiling Point:715℃    

Applications

Indium(I) iodide use as laboratory reagent normally.

Properties Suppliers
Indium Nitride Industrial Grade 99.9%

Indium nitride is dark gray powder, which is a new three group nitride material and stable under about 300℃. It is a kind of semiconductor with forbidden bandwidth 2.4eV and formation heat -17.6kJ/mol. It easily dissolve by acid and alkali. Indium(III) oxideis the raw material.

Indium Nitride

CAS No.:25617-98-5 EINECS No.:247-130-6 Molecular Weight:InN Molecular Weight:128.83
Melting Point:1200℃ Density:6.88    

Applications

Indium nitride film by metal organic chemical vapor deposition method owns photoluminescence properties. It get potential application in  photoelectronic parts of new high frequency tera hertz communication.

Properties Suppliers

1...89101112...34