Buy speciality chemicals | speciality chemicals manufacturers | speciality chemicals suppliers - WorldOfChemicals

chemical-categories

Organic Germanium Industrial Grade 99%

Organic germanium includes synthetic organic germanium, natural organic GE and biological organic Ge. The synthetic one is carboxyethyl germanium sesquioxide that is Ge-132, spirogermanium, Furan germanium derivates and other antiviral, anti-inflammatory and anticancer organic Ge. It is compound that has wide pharmacologic action, but if over dose, it cause acalcerosis. Natural organic Ge is extracted from natural plants, which gets no toxic and side effect to human body. Biological organic Ge is planting germanium compounds into biological body, for example yeast, germ, macro fungi, vegetable and so on.  Ge-132 is short of (GeCH2CH3COOH)2O3

Organic Germanium

Ge-132 applies to functional health food, medicine, cosmetics and so on.

Suppliers
Thallium Iodide Industrial Grade 99.9%

Thallium iodide is a chemical substance, which is white or yellow crystalline powder. It is slightly soluble in water and soluble in aqua regia and concentrated sulfuric acid, but not soluble in acid.  It is highly toxic and with chemical stability. Thallium(I) sulfate is the raw material.

Thallium Iodide

CAS No.:7790-30-9 EINECS No.:232-199-7 Molecular Formula:TlI Molecular Weight:331.27
Melting Point:440℃ Boiling Point:824℃ Density:7.1 UN 1707 6.1/PG 2
TlI Cd Zn Cu Pb Fe
≥99.9% ≤0.0005% ≤0.001% ≤0.001% ≤0.003% ≤0.0005%
K          
10-20ppm          

Applications

The mixture of thallium(I) iodide and thallium bromide apply to transmission of infrared radiation.

Thallous iodide applies to make medicine, do spectral analysis and special filter for hot relocation.

Suppliers
Titanium Silicide Industrial Grade 99%

Titanium silicide is dark gray square crystals, which is available in powder and targets. It is a kind of metal silicides. Titanium metal and silicon metal are raw materials. It owns high conductivity and high temperature stability. There are two production methods, physical vapor deposition (PVD) and chemical vapor deposition (CVD).

Titanium Silicide

CAS No.: 12039-83-7 EINECS No.: 234-902-2 Molecular Formula: TiSi2 Molecular Weight: 104.07
Melting Point: 1500℃ Density: 4.0 Moh’s Hardness: 4~5 Electrical resistivity: 123

Applications

Titanium disilicide powder is raw material for fine ceramics. It can process into sputtering targets, which is ceramic targets. TiSi2 film widely apply to MOS, MOSFET, DRAM in integrated circuit parts.

Suppliers
Dysprosium Oxalate Industrial Grade 99%

Dysprosium oxalate exist as decahydrate normally, which is white crystal. It is insoluble in water. Dysprosium(III) oxalate decahydrate lose one water molecular at 40℃. Dysprosium nitrate is the raw material.

Dysprosium Oxalate

 

CAS No.:24670-07-3 Molecular Formula:C6H20Dy2O22 Molecular Weight:769.2

 

Suppliers
Thallium Nitrate Industrial Grade 99.9%

Thallium nitrate is white crystalline particle, which is a thallium salt. It decompose at 260℃, which is soluble in water and acetone, but not soluble in ethyl alcohol. Thallium metal is the raw material

Thallium Nitrate

CAS No.:10102-45-1 EINECS No.:237-325-4 Molecular Formula:TlNO3 Molecular Weight:266.38
Melting Point:206℃ Boiling Point:433℃ Density:5.55 UN 2727 6.1/PG 2

Applications

Thallium(I) nitrate is for doing quantitative analysis of coexisting chlorine, bromide and iodine. It is also raw material for optical (waveguide) fibre material.

Thallous nitrate is a kind of analytical reagent, which is also raw material for thallium test paper and maritime marker.

Suppliers
Thallium Sulfate Industrial Grade 99.9%

Thallium sulfate is white crystalline powder, which is a thallium salt. It is easily soluble in dilute acid and water. Thallium metal is raw material for thallium(I) sulfate.

Thallium Sulfate

CAS No.:7446-18-6 EINECS No.:231-201-3 Molecular Formula:Tl2SO4 Molecular Weight:504.83
Melting Point:632℃ Density:6.77 Refractive Index:1.860 UN 1707 6.1/PG 2

Applications

Thallous sulfate used to be rodenticide. Now it mainly apply to Tl+ source in laboratory. Thallium(I) sulfate apply to analytical reagent and pharmacy industry. It is also raw material for other thallium salts as thallium(I) hydroxidethallium carbonatethallium bromidethallium iodide and so on.

Suppliers
Duzzit 27 Molybdenum Disulfide Lubricant

Duzzit 27 Molybdenum Disulfide Lubricant is a dry film lubricant fortified with Molybdenum Disulfide (MoS2) that reduces friction and improves overall operating performance. This lubricant bonds instantly to metal, rubber, plastic and most substrates to form a dirt repelling barrier that lubricates and protects the surface from pressure and friction. It forms a continuous, tough layer that provides a low coefficient of friction. It withstands high temperature up to 650° F & has extreme pressure properties. It is used as a general maintenance lubricant on gaskets, transfer belts and conveyor belts and as an assembly lube on motors, plant machinery and handling equipment.

Properties Suppliers
Duzzit 3303 Anti-Seize Assembly Compound

Duzzit 3303 Anti-Seize Assembly Compound is a high-purity, high-quality, NLGI grade 2 lithium-based grey coloured compound with approximately 50% MoS2. It is a pre-assembly lubricating compound formulated to prevent scuffing and scoring of mechanical components at start up, provide extreme pressure protection, protect against galling and corrosion, reduce wear and heat to extend component life and protection against lubricant starvation.

Properties Suppliers
Dysprosium Hydride Industrial Grade 99.9%

Dysprosium hydride is rare earth metal hydride powder.

Dysprosium Hydride

Purity: Dy/RE 99.9% 3N

Particle size: -100mesh, -200mesh

CAS No.:13537-09-2 EC No.:236-900-7 Molecular Formula:DyH3 Molecular Weight:165.524

 

Suppliers
Neodymium Fluoride Industrial Grade 99.5%

Neodymium fluoride is purple powder of hexagonal crystal structure, which is rare earth metal fluoride. It is insoluble in water, hydrochloric acid, nitric acid and sulfuric acid, but soluble in perchloric acid. Although absorb moist in air, it is relatively stable. It reacts with ammonium fluoride to form insoluble compound salt NH4F.NdF3. Neodymium oxide or neodymium nitrate is the raw material.

Neodymium Fluoride

Purity: Nd/RE 99.5% 2N5

CAS No.:13709-42-7 EINECS No.:237-253-3 Molecular Formula:NdF3 Molecular Weight:201.24
Density:6.506 Melting Point:1410℃ Boiling Point:2300℃ UN 3288

Applications

Neodymium trifluoride applies to make scintillant of detector, rare earth crystal laser material and rare earth fluoride glass fibre optics. In metallurgy industry, it is additive for magnesium alloy used in aviation and electrolytic production of metal neodymium. NdF3 use to make carbon electrode of electric arc lighting in lighting source. It is also raw material for neodymium iron boron alloy (NdFeB)

Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X