Buy speciality chemicals | speciality chemicals manufacturers | speciality chemicals suppliers - WorldOfChemicals


Duzzit 27 Molybdenum Disulfide Lubricant

Duzzit 27 Molybdenum Disulfide Lubricant is a dry film lubricant fortified with Molybdenum Disulfide (MoS2) that reduces friction and improves overall operating performance. This lubricant bonds instantly to metal, rubber, plastic and most substrates to form a dirt repelling barrier that lubricates and protects the surface from pressure and friction. It forms a continuous, tough layer that provides a low coefficient of friction. It withstands high temperature up to 650° F & has extreme pressure properties. It is used as a general maintenance lubricant on gaskets, transfer belts and conveyor belts and as an assembly lube on motors, plant machinery and handling equipment.

Properties Suppliers
Duzzit 3303 Anti-Seize Assembly Compound

Duzzit 3303 Anti-Seize Assembly Compound is a high-purity, high-quality, NLGI grade 2 lithium-based grey coloured compound with approximately 50% MoS2. It is a pre-assembly lubricating compound formulated to prevent scuffing and scoring of mechanical components at start up, provide extreme pressure protection, protect against galling and corrosion, reduce wear and heat to extend component life and protection against lubricant starvation.

Properties Suppliers
Lanthanum Hydride Industrial Grade 99.9%

Lanthanum hydride is a rare earth hydride, which is black inflammable powder. It react with water at 0℃. LaH2 is cubic structure, however LaH3 is face-centred cubic structure. The magnetism of LaH2 is a little lower than metal lanthanum, however LaH3 own diamagnetism. The electrical conductivity of LaH2 and LaH3  both are lower than lanthanum metal. Lanthanum metal is the raw material. La and Fe, Ni, Co form alloy, La compound with hydrogen, which are raw material for production of hydrogen storage materials.

Purity: La/RE 99.5% 2N5

Particle size: -100mesh, -200mesh

CAS No.:13864-01-2 EC No.:237-607-7 Molecular Formula:LaH3 Molecular Weight:141.930
LaH3 acts as hydrogenation catalyst and hydrogen storage material.

Dysprosium Hydride Industrial Grade 99.9%

Dysprosium hydride is rare earth metal hydride powder.

Dysprosium Hydride

Purity: Dy/RE 99.9% 3N

Particle size: -100mesh, -200mesh

CAS No.:13537-09-2 EC No.:236-900-7 Molecular Formula:DyH3 Molecular Weight:165.524


Neodymium Fluoride Industrial Grade 99.5%

Neodymium fluoride is purple powder of hexagonal crystal structure, which is rare earth metal fluoride. It is insoluble in water, hydrochloric acid, nitric acid and sulfuric acid, but soluble in perchloric acid. Although absorb moist in air, it is relatively stable. It reacts with ammonium fluoride to form insoluble compound salt NH4F.NdF3. Neodymium oxide or neodymium nitrate is the raw material.

Neodymium Fluoride

Purity: Nd/RE 99.5% 2N5

CAS No.:13709-42-7 EINECS No.:237-253-3 Molecular Formula:NdF3 Molecular Weight:201.24
Density:6.506 Melting Point:1410℃ Boiling Point:2300℃ UN 3288


Neodymium trifluoride applies to make scintillant of detector, rare earth crystal laser material and rare earth fluoride glass fibre optics. In metallurgy industry, it is additive for magnesium alloy used in aviation and electrolytic production of metal neodymium. NdF3 use to make carbon electrode of electric arc lighting in lighting source. It is also raw material for neodymium iron boron alloy (NdFeB)

Thallium Carbonate Industrial Grade 99.9%

Thallium carbonate is white crystalline powder, which is a thallium salt. It is highly toxic and irritant chemical, which have high refractive property . It is soluble in water, however insoluble in ethyl alcohol,ether and acetone . Thallium(I) hydroxide is the raw material.

Thallium Carbonate

CAS No.:6533-73-9 EINECS No.:229-434-0 Molecular Formula:Tl2CO3 Molecular Weight:468.78
Melting Point:272℃ Density:7.1 UN 1707 6.1/PG 2 Purity:99.99%


Thallium(I) carbonate is raw material for preparation of other thallium compounds as thallium nitratethallium acetatethallium iodidethallium formate and so on. It is also a chemical to analyze sulfur dioxide and do spectral analysis.

Thallous carbonate plays a role in producing artificial diamond and special glass additive

rubidium carbonate Industrial Grade 99.9%

Rubidium carbonate is white crystalline powder, which own strongly alkaline.  It tends to deliquesce. Rubidium(III) carbonate powder is soluble in water, but insoluble in alcohol.

Rubidium Carbonate

CAS No.: 584-09-8 EINECS No.: 209-530-9 Molecular Formula:Rb2CO3 Molecular Weight: 230.94
Melting Point: 837℃      
Ru2CO3 Li Na K Ca Mg
≥99.9% ≤0.001% ≤0.003% ≤0.005% ≤0.002% ≤0.001%
Cs Al SO42- Cl Fe Acid-insoluble Substance
≤0.02% ≤0.001% ≤0.003% ≤0.001% ≤0.001% ≤0.002%


Rubidium(III) carbonate is raw material for metal rubidium, various rubidium salts as rubidium fluoride, special glass, miniature high energy battery and crystal scintillation counter. It is a kind of analytical reagent too.

sodium nitroprusside dihydrate A.C.S. 99%

Appearance (Colour) : Ruby red

Appearance (Form) : Crystalline compound

Solubility (Turbidity) : 10% aq. solution Clear

Assay : min. 99%

Chloride (CI) : max. 0.02%

Sulphate (SO4) : max. 0.01%


Cadmium Metal Slugs Industrial Grade 99.9%

Cadmium metal is silver white transition metal, which is available in ingots, rods, sticks, plates, powders, targets and granules. It is soft and toxic, which exist in zinc ore. Cadmium and zinc both are battery material. Cd element slowly oxidize in moist air and lose metal luster. When heating its surface form oxide layer (CdO). With heating cadmium powder can directly react with halogen and other non-metallic elements as sulfur, selenium phosphorus. Cadmium ingot is high purity material for semiconductor and reagents.

Purity:99.995%, 99.999%, 99.9999%

CAS No.:7440-43-9 EINECS No.:231-152-8 Molecualr Formula:Cd Molecular Weight:112.411
Melting Point:320.9℃ Boiling Point:765℃ Density:8.642

Cadmium rod is raw material for nickel-cadmium battery, plastic, metal plating, pigment, painting, cadmium yellow dye and printing ink. It is also raw material for cadmium salts, cadmium vapor lamp, smoke bomb, cadmium mercury reagent, alloys, welding flux and metallurgical deoxidizer and so on.

Cd plates is a kind of reducing agent. It applies to metallurgy.

Di-ethyl amino ethoxy ethanol Technical 99

A colorless liquid with an amine-like odor. Slightly less dense than water and slightly soluble in water. Flashpoint below 141°F. DIETHYLAMINOETHOXYETHANOL(140-82-9) is an amine and alcohol. Amines are chemical bases. They neutralize acids to form salts plus water. 

M.F. / M.W.C8H19NO2=161.25

Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X