Surface Treatment Chemicals - suppliers, manufacturers, exporters

chemical-categories

MasterTop 1705

MasterTop 1705 is durable coloured coating based on an advanced water-dispersed, two-part epoxy resin. MasterTop 1705 can be applied on a wide variety of substrates such as concrete, masonry, etc. It is recommended as a protective coating on floors and walls where both high levels of aesthetics and chemical resistance are desired. MasterTop 1705 has been specially formulated to provide a durable coating system. MasterTop 1705 is suitable for contact with water intended for human consumption. It conforms to the Overall mitigation standards laid down in 21CFR175-300 of US-FDA for contact with potable water at room temperature.

Properties Suppliers
MasterTop 410

MasterTop 410 is a non-metallic floor hardener, which contains specially graded non-metallic hard wearing natural aggregates.MasterTop 410 is not recommended for use in areas where floor surface will be exposed to acids, their salts or materials which seriously and rapidly attack concrete. For applications under these service conditions consult BASF about their range of chemical resistant flooring systems, such as MasterTop 1200 series. MasterTop 410 can be easily applied as a dry shake over freshly floated concrete to provide a durable, non-slip monolithic floor.

Properties Suppliers
Noble Italia Marble Polishing Powder Technical

Noble Marble Polishing Powder

 

Noble Polishing powder is the top quality product for polishing stones especially marbles like Italian, Indian etc. We have tested our product in comparison with world best products available in market. Our Noble is of supreme quality and unbeatable product in current market.

 

Features:

1. Excellent Shine

2. Very Low Cost

3. Long Life Shine

4. Easy to Use

5. Requires low maintenance

 

Instructions:

1.  Use 12000 no diamond pads after 3000 no pads, spread 2 spoon of powder on 2X2 sq ft marble and add little water to make it Cream.

2. Buff with red pad for 5 mins.

3. Add water if required while buffing

4. Used red pad for buffing

5. Once the final polish is achieved, wipe off or wash the floor with water. Do not dry this compound while buffing

Noble Marble Polishing Powder

Noble Polishing powder is the top quality product for polishing stones especially marbles like Italian, Indian etc. We have tested our product in comparison with world best products available in market. Our Noble is of supreme quality and unbeatable product in current market.

Features:

1. Excellent Shine

2. Very Low Cost

3. Long Life Shine

4. Easy to Use

5. Requires low maintenance

Instructions:

1.  Use 12000 no diamond pads after 3000 no pads, spread 2 spoon of powder on 2X2 sq ft marble and add little water to make it Cream.

2. Buff with red pad for 5 mins.

3. Add water if required while buffing

4. Used red pad for buffing

5. Once the final polish is achieved, wipe off or wash the floor with water. Do not dry this compound while buffing

 

Non Cut demo is available on youtube

https://www.youtube.com/watch?v=x9bFNH_5JVU&t=88s

For More Details:

https://nobleitaliamarblepolishingpowder.blogspot.com/

For More Products

http://www.chromestarchemicals.com/

Properties Suppliers
Reebol 2010

Reebol 2010 is a ready to use mineral release agent that allows easy stripping of moulds and formworks. It is suitable for all kinds of molds, retains the characteristics of the concrete surface, allowing subsequent application of paints or coatings. The advantages are it allows the deferred stripping of concrete after setting, once applied, it is low sensitive to washout by rain and further it fits perfectly to the concrete with or without steam curing.

Properties Suppliers
Starcryl-A400

Starcryl-A400 is used in manufacture of flexible waterproofing two component adhesive mortars and of flexible insulating coatings containing cement. Starcryl-A400 is especially good for the manufacture of systems used to bridge cracks and for flexible coatings.

Properties Suppliers
Starcryl-A76

Starcryl-A76 is specially formulated polymer emulsion for modifying cementitious compositions, cement primers, crack fillings, anchors and grouts, waterproofing and damp proofing. Mortars prepared with Starcryl A76 are durable tough and ideal for use in thin section applications. They have excellent adhesion to various substrates like wood, concrete, brick and metal.

Properties Suppliers
aluminum hydroxide purified 99.8% >99%

ATH Main use:

1. As filler of artificial marble and Acrylic resin polyester agate ,

2. Applied to the BMC, SMC, epoxy mold, polyolefin wire and cable insulation,

3.  Filler for composite rubber and synthetic rubber, flame retardant,

4. Flame retardant filler of polyvinyl chloride, epoxy resin, unsaturated polyester, polyurethane, and polyolefin resins,

5. Used in epoxy resins, polyurethane casting resin printed circuit board, other electronic and electrical products,

6. Used in aluminum sulfate, aluminum fluoride, cryolite, polyaluminum chloride, sodium aluminate, synthetic zeolites, and other aluminum salt.

Properties Suppliers
hydroxypropyl methylcellulose Technical 99%

Hydroxypropyl Methyl Cellulose (HPMC) are widely used in construction,pharmaceutical,food,paints, cosmetic,detergent ,as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
 
Appearance White or off-white powder
Methoxy ( % ) 19.0~ 24.0
Hydroxypropoxy ( % ) 4.0 ~ 12.0
pH 5.0~ 7.5
Moisture ( % ) ≤ 5.0
Residue on ignition ( % ) ≤ 5.0
Gelling temperature ( ℃ ) 70~ 90
Particle size min.99% pass through 100 mesh
Typical grade Viscosity
(NDJ, mPa.s, 2%) Viscosity
(Brookfield, mPa.s, 2%)
HPMC MP400 320-480 320-480
HPMC MP60M 48000-72000 24000-36000
HPMC MP100M 80000-120000 40000-55000
HPMC MP150M 120000-180000 55000-65000
HPMC MP200M 160000-240000 Min70000
HPMC MP60MS 48000-72000 24000-36000
HPMC MP100MS 80000-120000 40000-55000
HPMC MP150MS 120000-180000 55000-65000
HPMC MP200MS 160000-240000 Min70000
 
Construction Applications:
 
 
Tile Adhesive
•Good water retention: prolonged opening time will make tiling more efficient.
•Improved adhesion and sliding resistance: especially for heavy tiles.
•Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
 
Cement Plaster / Dry mix mortar
•Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
•Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
•Increased water demand: increased open time, expanded spry area and more economical formulation.
•Easier spreading and improved sagging resistance due to improved consistency.
 
 
 
 
 
Wall putty
•Water retention: maximized water content in slurry.
•Anti-sagging: when spreading a thicker coat corrugation can be avoided.
•Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation
HPMC can increase the mortar volume.
 
 
Exterior Insulation and Finish System ( EIFS )
•Improved adhesion.
•Good wetting ability for EPS board and substrate.
•Reduced air entrancement and water uptake.
 
 
 
Self-leveling
•Protection from water exudation and material sedimentation.
•No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
 
 
Crack Filler
·Better workability: proper thickness and plasticity.
·Water retention ensures prolonged work time.
·Sag resistance: improved mortar bonding ability.
 
 

Properties Suppliers
sodium gluconate Technical 98%

Commodity Name: Sodium Gluconate

CAS No.:527-07-1

Synonyms: D-Gluconic acid sodium salt; Natriumgluconat (De); gluconato de sodio (Es); gluconate de sodium (Fr)

Molecular Formula: C6H11NaO7

Molecular Weight: 218.13847

Description: white or yellow crystalline powder or granula

contact: geng@bio-fuyang.com

Specification: Food Grade/ tech grade

Packing and Transportation: Adopting the package of 25kg/kraft bag or 25kg/polywoven bag or paper bag with pe inner

The transportation shall be in accordance with the requirement of general chemicals.

Products Storage: Store in a cool, dry, ventilated environment.

Properties Suppliers
sodium lignosulphonate HS CODE: 38040090

Sodium Lignosulphonate in Ceramic for ceramic products, can reduce the carbon content to increase green strength and reduce the amount of plastic clay, mud flows and good to improve the yield 70-90%, sintering speed reduction from 70 minutes to 40 minutes.

 

contact:
vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29
email: yongchemical@yahoo.com
website:www.yongchemical.com

Properties Suppliers

12