Buy Textile Industry Chemicals | Dyes Pigments | Stain Removers | Binders - WorldOfChemicals

chemical-categories

Aquatex-CS-25

Aquatex-CS-25 is extensively used in textile and garment industry to prevent static cling and make the fabric soft and in many others.It gives very good softness and body.Aquatex-CS-25 imparts antistatic effect and good lubricating property.

Properties Suppliers
Aquatex-CWS-Pre

Aquatex-CWS-Pre is known for its supreme quality and durability. It is extensively used softeners in the garment processing industry due to their cost efficiency and wide range of potential textures and in many other applications. Aquatex-CWS-Pre gives very good surface smoothness together with inner softness and provides a non-greasy handle.

Properties Suppliers
Ardex D 15

ARDEX D15 is an easy to apply, ready mixed wall tile adhesive for ceramic and mosaic tiles. Suitable for use in domestic showers and bathrooms on appropriate backgrounds, in dry, internal locations, for fixing ceramic tiles and mosaics on gypsum plaster, paper faced boards, concrete, cement and sand renders, as well as fixing porous tiles to existing ceramic tiling.

Properties Suppliers
Ardex D 30

Ardex D 30 is a water resistant, non-slip ready mixed wall tile adhesive. The BS EN 12004 D2 TE designation for ARDEX D 30 classifies the adhesive as an" improved dispersion adhesive with additional characteristics, reduced slip and extended open time". The additional characteristics for ARDEX D 30 determined in accordance with BS EN 12004 are a high adhesion strength after water immersion and a high adhesion strength after exposure to elevated temperatures making this product ideal for use in commercial and domestic showers, kitchens and bathrooms.

Properties Suppliers
Ardex F 4

Ardex F 4 is a cement-based fine grouting compound for ceramic wall tiles and mosaics where the joint width does not exceed 4mm. The powder is mixed with water to produce a soft, creamy and easily worked mortar with good filling properties, allowing joints to be completely filled in one operation. The hardened ARDEX F 4 joint is smooth, weather resistant, unaffected by water and can be used for internal and external tiling in dry and wet conditions, including swimming pools with non-aggressive water conditions.

Properties Suppliers
Ardex Mg

Ardex Mg is suitable for grouting natural stone or marble wall or floor tile joints up to 8mm wide. The ARDEX MG powder, when mixed with water, produces a soft, creamy, easily worked mortar with good filling properties, enabling deep joints to be filled in one operation.

Properties Suppliers
Ardex S 16

Ardex S 16 is a grey powder based on special cements, high quality synthetic resins and fillers, which is mixed with water to produce a slump free, easily applied mortar with a working time of approximately 30 minutes. It is particularly suitable for use in situations where the adhesive bed has to dry quickly or the tiling has to be grouted and put into use shortly after fixing.

Properties Suppliers
Ardex S 20/S 20 W

Ardex S 20/S 20 W is classified as C1 F “fast setting cementitious adhesive” and ARDEX S 20W is classified as C2 F “improved fast setting cementitious adhesive with additional characteristics” in accordance with BS EN 12004. ARDEX S 20 is a special rapid hardening and drying, cement-based adhesive for fixing un calibrated natural stone floor and wall tiles in internal situations.

Properties Suppliers
Ardex X 7001

Ardex X 7001/Ardex X 7001W is a grey or white MICROTEC fibre reinforced rapid hardening and drying, flexible cement-based floor tile adhesive. It is ideal for fixing floor tiles to wood-based sheets and boards and other surfaces. The inclusion of the fibres reduces the possibility of the floor tiles cracking over board joints if movement of the timber occurs.

Properties Suppliers
Ardex-Flex 6001

Ardex-Flex 6001 is a rapid setting and hardening ,grey, cement-based, floor and wall tile adhesive ,which will allow grouting to commence after 11/2hours at 20°C and is specifically formulated to have enhanced properties of adhesion and flexibility ideal for fixing fully vitrified or porcelain tiles and other tiles with low porosity as well as glass and porcelain mosaics without the need of an admixture. It is suitable for fixing all types of ceramic tiles and mosaics in internal and external situations, including swimming pools.

Properties Suppliers