Buy Textile Industry Chemicals | Dyes Pigments | Stain Removers | Binders - WorldOfChemicals

chemical-categories

ARDEX WA

ARDEX WA is a solvent free, epoxide resin-based thin bed adhesive and grouting compound, for use where chemical resistance is required or where cement-based grouts are inappropriate. ARDEX WA is suitable for fixing and grouting all types of ceramic tiles, glass and ceramic mosaics in internal and external situations. When fully cured, the ARDEX WA mortar provides a decorative, waterproof, weather and frost resistant joint from 2-12mm wide that is chemically resistant.ARDEX WA is especially suitable for use in swimming pools, showers, bathrooms, shops, abattoirs, dairies,hospitals, hydrotherapy and spa baths, sports centres and other specialised buildings where high standards of hygiene and cleanliness are required.

Properties Suppliers
ARDEX X 32

ARDEX X 32 Natural Stone Adhesive is a special rapid hardening and drying, cement based adhesive for fixing natural stone floor and wall tiles including moisture sensitive natural stone tiles and un calibrated natural stone floor tiles. It may also be used for concrete slabs and ceramic tiles including porcelain tiles in internal and external situations.

Properties Suppliers
ASCOWAY-HAL

ASCOWAY-HAL is an unique natural mineral based wetting, scouring, stabilizing, sequestering and lubricating agent for pretreatment and bleaching of cotton and its blends & low foaming.

Properties Suppliers
ATC-PERSTAB

ATC-PERSTAB is an economical non-silicate based organic stabilizer specially designed for alkaline bleaching of cotton and cellulosic blends with hydrogen peroxide. It provides excellent stabilization of peroxide even at high temperature and high alkaline condition & thus produces a high degree of whiteness on the bleached fabric.It replaces sodium silicate completely thereby avoids scale formation, hence softer feel. It does not generate foam even at high turbulence, hence suitable for simultaneous scouring & bleaching of cotton in soft flow machines.

Properties Suppliers
ATC-WETFAST

ATC-WETFAST is a powerful low foaming rapid wetting agent. It has excellent wetting & penetrating power even at very low concentration. It is very useful for the purpose of rewetting i.e. producing highly absorbent yarn or fabric such as terry towels, surgical cotton etc. It is stable to hard water. It is stable in acidic and alkaline medium and further it is primarily biodegradable.

Properties Suppliers
AUXI IN UDI

AUXI IN UDI can be applied both in the exhaust bath as well as in padding processes. In the exhaust dyeing of reactives and vats prior addition of 1-2% of AUXI IN UDI in the dyebath prevents Ca and Mg ions interfering with the dyeing process, particularly when using hard water.In the dyeing of reactives by cold pad-batch process the addition of 2-3 gm/I AUXI IN UDI in the padding solution gives dyeing with good levelness and solidity for the same reason. Addition of 2 gm/I AUXI IN UDI during the washing of reactive dyeing helps in the rapid removal of unfixed dye. This leads to improved rub fastness of the dyeings. Additionally, during washing-off of cold pad-batch dyeings the addition of 2 gm/I of AUXI IN UDI in the washing bath helps in the quick removal of sodium silicate from the fabric.

Properties Suppliers
AVOLAN SCN 150N

AVOLAN SCN 150N is a low-foaming levelling agent for use in wool dyeing.

Properties Suppliers
Accepta 2592

Accepta 2592 is an excellent multi purpose hydrocarbon based antifoam. Accepta 2592 both prevents and controls foam generation. Accepta 2592 can be used as a defoamer in cooling systems, process applications and waste treatment. Accepta 2592 works well over pH range 4 - 12. Accepta 2592 can be used in paper making, textile printing, acid cleaning, adhesive manufacture, paint manufacture, plus many other uses.

Properties Suppliers
Accepta 4452

Accepta 4452 is an excellent multi purpose hydrocarbon based antifoam. Accepta 4452 can be used as a defoamer in cooling systems, process applications and waste treatment.It works well over pH range 4-12.It can be used in paper making, textile printing, acid cleaning, adhesive manufacture, paint manufacture, plus many other uses.

Properties Suppliers
Accepta 4552

Accepta 4552 is an excellent multi purpose hydrocarbon based antifoam. Accepta 4552 both prevents and controls foam generation. Accepta 4552 can be used as a defoamer in cooling systems, process applications and waste treatment. Accepta 4552 works well over pH range 4 - 12. Accepta 4552 can be used in paper making, textile printing, acid cleaning, adhesive manufacture, paint manufacture, plus many other uses.

Properties Suppliers

1...7891011...91
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X