Buy vulcanizing agents used in rubber vulcanization, vulcanizing agents manufacturers, suppliers


Rubber Crosslinking agent TCY(TTCA) Industrial Grade

Chemical Name 2,4,6-Trimercapto-s-triazine

  Molecular Structure

  Molecular Formula C3H3N3S3

 Molecular Weight177.3

 CAS No : 638-16-4

Specifications  Q/KES336-2007




          Light-yellow Powder

Melting Point,℃                     Min.


Ash%                                      Max.


Heat Loss%                       Max.


Residue on 150μm Sieve,%Max.



  Properties:Light yellow powder,melting point is more than 300℃,Insoluble in water(20℃)

 Applications: Crosslinking of Halogen-containing polymers,Age-resister for diene rubbers,  
                           Adhesion between polymers and metals, Copper inhibitor.

 Storage: Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to
                         direct sunlight.

Packing: In 25kg paper bags with plastic inner.

Properties Suppliers
Rubber Vulcanizing Agent DTDM Industrial Grade

Chemical Name   4,4’-Dithio Dimorpholine 

Molecular Structure

Molecular Formula  C8H16N2S2O2

Molecular Weight  236

CAS No.  103-34-4

Specifications  Q/KS24-2007




White or light-yellow crystals

Initial Melting Point               (℃) Min.


Heat Loss                     (%)Max.


Ash                               (%)Max



Sulfur Content                  (%)




Properties  Relative density is 1.32~1.38. Soluble in alchohol, acetone, benzene, ethlene dichloride, insoluble in water and fatty hydrocarbon.

Applications It is used as the rubber accelerator and vulcanized agent of natural rubber, synthetic rubber. Under the curing temperature, it can release activing sulfur, effective sulfur content is about 27%. It has operating safety, curing speed is slow when it is used alone. The curing speed can be arised when used with thiazole, thiuram, thiocarbamate. There are many advantages, such as, no-spray, no-pollution, no-discolor, easy to disperse. It is especially suitable to butadiene rubber. Mainly it is used to manufacture tyres, inner tube, rubber beltl, heat-resistance rubber products, etc.. DTDM is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Category 4.

                    Storage Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.

Packing 25kg net paper bags lined with polyethylene film bags.


Properties Suppliers
Silcoset 101

Silcoset 101 is a 2-component room temperature vulcanizing silicone rubber system that is employed as an encapsulant for sensitive electrical and electronic assemblies. It is cured by the addition of A and B parts to produce a moderately hard silicone rubber, which offers good protection against chemicals and environmental contamination, shock and vibration. Silcoset 101 is recommended for potting, mbedding and encapsulating delicate electrical and electronic equipment; sealing and caulking.

Properties Suppliers
Sulfur Dichloride Technical <99%

We are the manufacturer, trader, exporter and supplier of Sulphur Dichloride (SDCL) and Sulphur Monochloride (SMCL).

Company manufactures above chemicals based on Chlorine & Sulphur. These Chemicals are hazardous chemical, so adequate care is taken in maintaining total environmental safety control while manufacturing the same.

Contract / Custom Manufacturing:
As a group of companies , we are always looking forward to contract manufacturing of those chemicals which are based on Sulphur Mono chloride and Sulphur Di Chloride.

Interested Indian and International manufacturers based on above products namely SMCL and SDCL  which are required as intermediates for:
 * Pesticides,
 * Rubber Chemicals,
 * Lube Oil Additives,
 * Pharmaceutical intermediates,
 * Dyes & Dyes Intermediates, etc.
 as well as companies looking for the third party custom manufacturing of   SMCL and SDCL are encouraged to contact us at our corporate office at Mumbai, INDIA .

Properties Suppliers
Superfine Rubbermakers Sulfur

Superfine Rubbermakers Sulfur is used as a vulcanizing agent for rubber compounds.

Properties Suppliers

TDCURE TMTD is used as a primary or secondary (ultra) accelerator in multiple blend accelerator systems with thiazoles and sulfenamides. It is also used as a vulcanizing agent (sulfur donor) in most of the sulfur cured elastomers. It can be used in NR, IR, BR, SBR, CR, and EPDM.

Properties Suppliers

Tellurium is a metalloid which looks similar to tin. It is chemically related to selenium and sulfur. It was discovered in Transylvania in 1782 by Franz-Joseph Müller von Reichenstein in a mineral containing gold and tellurium. Martin Heinrich Klaproth named the new element in 1798 after the Latin word for "earth", tellus. It is primarily used in alloys, foremost in steel and copper to improve machinability. Applications in solar panels and as a semiconductor material also consume a considerable fraction of tellurium production. It is also used to color ceramics. The strong increase in optical refraction upon the addition of selenides and tellurides into glass is used in the production of glass fibers for telecommunications. These chalcogenide glasses are widely used. Rubber can be vulcanized with tellurium instead of sulfur or selenium. The rubber produced in this way shows improved heat resistance.

Properties Suppliers
Thanecure T9

Thanecure T9 is a polyfunctional isocyanate which is used as a vulcanization agent for polyurethane rubbers and as an adhesion promoter for rubber to textile bonding.

Properties Suppliers
Vulkacit 576

Vulkacit 576 is used as vulcanization accelerator.

Properties Suppliers
Vulkacit CZ/C

Vulkacit CZ/C is used as vulcanization accelerator widely used in rubber industry.

Properties Suppliers