Buy wastewater treatment chemicals, wastewater treatment chemicals manufacturers, suppliers

chemical-categories

A55L

A55L is use in poultry and meat processing plants, and petroleum refinery applications.

Properties Suppliers
BCP10

BCP10 enhance BOD and COD removal while reducing sludge yield, remove chemical deposits and prevent scum formation in holding tanks, sewers, drains and aeration basins, prevent the blocking, ponding and possible collapse of filter bed media, accelerate the removal of unpleasant odours and increase the efficiency of overloaded treatment systems.

Properties Suppliers
BCP11

BCP11 can help start-ups in new plants, improve effluent quality, increase wastewater treatment efficiency, reduce plant upsets from shocks, control filaments and lower odours and foam.

Properties Suppliers
CB 15

CB 15 is a blended activated carbon used to enhance the pollutant removal rate in the waste water.

Properties Suppliers
DF-10

DF-10 is a silicone/solvent defoamer designed especially to control foaming conditions often found in waste water treatment, foam resulting from surfactant processes and produced water foaming. DF-10 is formulated with aliphatic solvents and silicone and is readily biodegradable. DF-10 can be batch treated at rates of 50 to 500 ppm.

Properties Suppliers
BCP35M

BCP35M contains aerobic and facultative anaerobic microorganisms to provide greater resistance to the effects of organic inhibitors present in wastewaters with a high salt content.

Properties Suppliers
BCP3550

BCP3550 reduces the accumulation of petroleum products in sumps and drains. This reduces the cost of cleaning and maintenance, improves odour control and achieves BOD reduction.

Properties Suppliers
Bacfood

Bacfood is a special blend of inorganic nutrients used in waste water treatment to promote proper growth of bacteria.

Properties Suppliers
Coag 577

Coag 577 is a liquid cationic polyelectrolyte of medium molecular weight. It works effectively as a primary coagulant and can replace alum and ferric salts in waste water clarification. It is also usefull in other solid-liquid separation such as sludge dewatering and clarifying elmulsions.

Properties Suppliers
DF NT-90

DF NT-90 is a non-toxic blended, alcohol based compound used to prevent and reduce foaming conditions commonly encountered in drilling, work-over and completion, and waste water treating applications. DF NT-90 is normally used at treatment rates of 5 gallons per 200-250 barrels of fluid. DF NT-90 should be slowly added directly to the fluid in a mixing tank. Spraying directly onto foam is the preferred method of treating surface foam.

Properties Suppliers

12345...12
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X