Buy wastewater treatment chemicals, wastewater treatment chemicals manufacturers, suppliers

chemical-categories

Koagen 215

Koagen 215 is a liquid blend of polymerised aluminium salt used as coagulant in raw and wastewater treatment.

Properties Suppliers
Koagen 90 FC

Koagen 90 FC is a grade of ferric salt specially enhanced to give a stronger coagulating property compared to standard iron based coagulant.

Properties Suppliers
Metafloc M

Metafloc M is highly effective in reducing soluble metals to very low levels in wastewater.

Properties Suppliers
Methanol

Orchid Chemical trading is a quality-driven firm and make sure that our offerings are properly kept and processed. For this, we have installed all the in-house storage facility that helps us in meeting bulk and urgent requirements of the clients. We are from dubai(United Arab Emirates) and engaged in catering to the market with quality products at nominal prices. The largest use of our methanol by far is in making other chemicals. It is used on a limited basis to fuel internal combustion engines. In some wastewater treatment plants, a small amount of methanol is added to wastewater to provide a carbon food source for the denitrifying bacteria.

Properties Suppliers
NANO-ZYME

NANO-ZYME is an effective microbes (EM) contains multiple strains of aerobic and facultative anaerobic microbes, which are selected for their compatible, symbiotic metabolic pathways. NANO-ZYME effectively treats the suspended and floatable organic debris; reduce the COD (Chemical Oxygen Demand), BOD (Biochemical Oxygen Demand), and TSS (Total Suspended Solids) combination of various strains will successively promotes the growth of bacterial population, break down and digest the waste in both aerobic and anaerobic conditions to a far greater degree than the same quantity of single microbial strain. NANO-ZYME is available at both liquid and solid state and it contains more than fifteen stains of natural bacteria and concentrated source of enzymes which are capable of producing hydrolyzing enzymes and degrade the organics, nitrates and phosphates, which are genetically capable of producing concentrations of enzymes in waste treatment systems under both aerobic and anaerobic conditions. In NANO-ZYME solid form of product the spontaneous adsorption of microbial cells to surface of carrier materials results in colonization of the support material and leads to the formation of biofilms. In a biofilm, the micro-organisms are entrapped within a matrix of extra-cellular polymeric substances (EPS) secreted by themselves. NANO-ZYME can be used in agro industries, breweries, distilleries, pulp& paper, textiles, dyes, pharma, leather, food industry, sugar industry, dairy industry, hotels, hospitals, municipal and industrial waste water treatments.

Properties Suppliers
Oxychlor 10

Oxychlor 10 is a liquid oxidising agent based on sodium hypochlorite. It is used in waste water treatment to remove COD, colour and some harmful chemicals. It is also used to disinfect drinking and wastewater.

Properties Suppliers
P-Floc 77

P-Floc 77 is a liquid cationic polyelectrolyte of medium molecular weight. It works effectively as a primary coagulant and coagulant aid in water clarification and as a dewatering aid in industrial waste sludges. It is also useful in other solid-liquid separation such as secondary clarifiers, settling of product stream and clarifying emulsions.

Properties Suppliers
PAM - Anionic polyacrylamide

Description:
This product is a water- soluble high polymer.It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.


Application Field:
1. It can be used to treat industrial wastewater and mining wastewater.
2. It can also be used as an additive of the mud materials in oil-field, geological drilling and well boring.


Application Method:
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.

2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60℃).

3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.

 
Package and Storage:
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.

2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35℃.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.

 

Yixing Cleanwater Chemicals Co.,Ltd.

We specialize in providing chemicals and service for waste water and urban sewage treatment. Main products include Water decoloring agent, PAC, PAM, pdadmac, polyamine, flocculant and coagulant,etc. More info. pls refer to cleanwaterchems at holly-tech.net

Properties Suppliers
PAM - Cationic polyacrylamide

Description:
This product is a water-soluble high polymer.It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.

 

Application Field:
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater and life sewage water. 
3. It can be used for papermaking to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.

 

Advantage:
1. Easy to dissolve, dissolve time 40min.
2. High efficiency.
3. High molecular, molecular weight 10million.
4. High purity, without impurity. 

Application Method?
1. It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.

2. When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60?. 

3. The most economical dosage is based on the trial.

Package and Storage:
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.

2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35?.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.

 

Yixing Cleanwater Chemicals Co.,Ltd.

We specialize in providing chemicals and service for waste water and urban sewage treatment. Main products include Water decoloring agent, PAC, PAM, pdadmac, polyamine, flocculant and coagulant,etc. More info. pls refer to cleanwaterchems at holly-tech.net

Properties Suppliers
PAM - Nonionic polyacrylamide

Description:
This product is a water- soluble high polymer.It’s not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid.

 
Application Field:
1. It is mainly used to recycle the wastewater from clay producing.
2. It can be used to centrifugalize the tailings of coal washing and filter the fine particles of iron ore.
3. It can also be used to treat industrial wastewater.
  

Application Method:
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.

2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60?).

3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.

 
Package and Storage:
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.The colloidal product can be packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200Kg.

2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35?.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.

 

Yixing Cleanwater Chemicals Co.,Ltd.

We specialize in providing chemicals and service for waste water and urban sewage treatment. Main products include Water decoloring agent, PAC, PAM, pdadmac, polyamine, flocculant and coagulant,etc. More info. pls refer to cleanwaterchems at holly-tech.net

Properties Suppliers

1...34567...9