Water Proofing Compounds - suppliers,manufacturers,exporters

chemical-categories

Nitocote CM650

Nitocote CM650 is designed to coat concrete or masonry structures with a thin layer of a cementitious decorative and waterproofing coating, applicable by brush, roller or spray, giving a concrete-like appearance. It covers concrete imperfections such as cracks, pores, roughness, voids or other defects in the concrete surface. It seals the walls and ceilings of concrete or mortar as well as shrinkage cracks.

Properties Suppliers
Betec Flex S150

Betec Flex S150 is a flexible two-part polymer-modified cementitious waterproofing system. The two-components of Betec Flex S150 are mixed together with a slow speed drill and paddle to form a smooth slurry. The slurry is applied by trowel or brush, in two coats, to form a hard but flexible waterproof cementitious coating. It provides excellent adhesion to concrete, masonry, ceramics and most common substrates.

Properties Suppliers
Perma Eazee Coat

Perma Eazee Coat is a milky white liquid which can be brush applied to most structural surfaces to make them waterproof. The coating is UV stable and highly flexible. The advantages are it can be used on wet surface and during rainy season, the membrane allows the concrete surface to breath and further it cures to give a permanently flexible and resilient surface resistant to a wide range of temperatures.

Properties Suppliers
aluminium sulfate

Aluminium sulfate is an industrial chemical used as a flocculating agent in the purification of drinking water and waste water treatment plants, and also in paper manufacturing. It is used as a mordant in dyeing and printing textiles. Aluminium sulfate is the active ingredient of some antiperspirants. It is usually found in baking powder, where there is controversy over its use due to concern regarding the safety of adding aluminium to the diet. In construction industry it is used as waterproofing agent and accelerator in concrete. Another use is a foaming agent in fire fighting foam. It is also used in styptic pencils, and pain relief from stings and bites. It can also be very effective as a molluscicide, killing spanish slugs.

Suppliers
sodium lignosulphonate

1. Sodium lignosulphonate used In the field of concrete additives, the sodium lignosulphonate series products can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. The products can be directly adopted as additive in the concrete .Moreover, they also can be compounded with such high-performance water reducing admixtures as naphthalene series and melamine series etc. And, they are also ideal materials for series retardingagents and pumping agents etc.

 

contact:

vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29
email: yongchemical@yahoo.com
website:www.yongchemical.com

Suppliers
hydroxyethylcellulose Purified 99%

Hydroxyethyl Cellulose (HEC) is nonionic water-soluble cellulose ether, used as thickener, protective colloid, water retention agent and rheology modifier in different applications like water-based paints, building materials, oil field chemicals and personal care products.
Typical properties
Appearance White to off-white powder
Particle size 98% pass 100 mesh 
Molar substituting on degree (MS) 1.8~2.5
Residue on ignition (%) ≤0.5
pH value 5.0~8.0
Moisture (%) ≤5.0     
 
 
Popular grades 
Typical grade Bio-grade Viscosity 
(NDJ, mPa.s, 2%) Viscosity
 (Brookfield, mPa.s, 1%) Viscosity setting
HEC HS300 HEC 300B 240-360 LV.30rpm sp2
HEC HS6000 HEC 6000B 4800-7200 RV.20rpm sp5
HEC HS30000 HEC 30000B 24000-36000 1500-2500 RV.20rpm sp6
HEC HS60000 HEC 60000B 48000-72000 2400-3600 RV.20rpm sp6
HEC HS100000 HEC 100000B 80000-120000 4000-6000 RV.20rpm sp6
HEC HS150000 HEC 150000B 120000-180000 7000min RV.12rpm sp6  
 
 
 
Application 
Types of Uses Specific Applications Properties Utilized
Adhesives Wallpaper adhesives 
latex adhesives 
Plywood adhesives Thickening and lubricity
Thickening and water-binding
Thickening and solids holdout
Binders Welding rods 
Ceramic glaze
Foundry cores Water-binding and extrusion aid
Water-binding and green strength
Water-binding
Paints latex paint
Texture paint Thickening and protective colloid
Water-binding
Cosmetics Hair conditioners 
Toothpaste 
liquid soaps and bubble bath Hand creams and lotions Thickening
Thickening
Stabilizing
Thickening and stabilizing
Address:No.188,Huaguang Road,,Zhangdian,Zibo,Shandong,255000,China Tel:+86-533-2688771

Suppliers
sodium lignosulphonate HS CODE: 38040090

Sodium Lignosulphonate in Ceramic for ceramic products, can reduce the carbon content to increase green strength and reduce the amount of plastic clay, mud flows and good to improve the yield 70-90%, sintering speed reduction from 70 minutes to 40 minutes.

 

contact:
vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29
email: yongchemical@yahoo.com
website:www.yongchemical.com

Suppliers
hydroxypropyl methylcellulose Technical 99%

Hydroxypropyl Methyl Cellulose (HPMC) are widely used in construction,pharmaceutical,food,paints, cosmetic,detergent ,as thickener, emulsifier, film-former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.
 
Appearance White or off-white powder
Methoxy ( % ) 19.0~ 24.0
Hydroxypropoxy ( % ) 4.0 ~ 12.0
pH 5.0~ 7.5
Moisture ( % ) ≤ 5.0
Residue on ignition ( % ) ≤ 5.0
Gelling temperature ( ℃ ) 70~ 90
Particle size min.99% pass through 100 mesh
Typical grade Viscosity
(NDJ, mPa.s, 2%) Viscosity
(Brookfield, mPa.s, 2%)
HPMC MP400 320-480 320-480
HPMC MP60M 48000-72000 24000-36000
HPMC MP100M 80000-120000 40000-55000
HPMC MP150M 120000-180000 55000-65000
HPMC MP200M 160000-240000 Min70000
HPMC MP60MS 48000-72000 24000-36000
HPMC MP100MS 80000-120000 40000-55000
HPMC MP150MS 120000-180000 55000-65000
HPMC MP200MS 160000-240000 Min70000
 
Construction Applications:
 
 
Tile Adhesive
•Good water retention: prolonged opening time will make tiling more efficient.
•Improved adhesion and sliding resistance: especially for heavy tiles.
•Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker.
 
Cement Plaster / Dry mix mortar
•Easy dry mix formula due to cold water solubility: lump formation can be easily avoided, ideal for heavy tiles.
•Good water retention: prevention of fluid loss to the substrates, the appropriate water content is kept in mixture which guarantees longer concreting time.
•Increased water demand: increased open time, expanded spry area and more economical formulation.
•Easier spreading and improved sagging resistance due to improved consistency.
 
 
 
 
 
Wall putty
•Water retention: maximized water content in slurry.
•Anti-sagging: when spreading a thicker coat corrugation can be avoided.
•Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation
HPMC can increase the mortar volume.
 
 
Exterior Insulation and Finish System ( EIFS )
•Improved adhesion.
•Good wetting ability for EPS board and substrate.
•Reduced air entrancement and water uptake.
 
 
 
Self-leveling
•Protection from water exudation and material sedimentation.
•No effect on slurry fluidity with low viscosity
HPMC, while its water retention characteristics improve the finish performance on the surface.
 
 
Crack Filler
·Better workability: proper thickness and plasticity.
·Water retention ensures prolonged work time.
·Sag resistance: improved mortar bonding ability.
 
 

Suppliers
sodium gluconate (factor) technical 98% Technical 98

sodium gluconate Used as a cement admixture: after a certain amount of sodium gluconate is added into the cement, it can improve the plasticity and strength of the concrete, and has retardation effect, namely postpone the initial and final setting time of the concrete;  

contact:
vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29
email: yongchemical@yahoo.com

website:www.yongchemical.com     

Suppliers
calcium lignosulphonate exporter(feed additive lignin) hs code:3804000090 Technical

calcium lignosulphonate

Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 

contact:

vicky
Mobile: 0086-18162818098 (what's app is ok)
wechat: Lignosulphonate
skype: missorange29
email: yongchemical@yahoo.com
website:www.yongchemical.com

Suppliers

12
www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X