Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals

chemical-categories

MCT 514

MCT 514 provides superior corrosion inhibition to multi-metal systems operating at high or low temperatures. Recommended for diesel and other internal combustion engines, hot water heating systems, chilled water circuits and other closed systems containing ferrous and nonferrous metals.

Properties Suppliers
MCT 517

MCT 517 is an all-organic inhibitor product designed to provide corrosion protection to multi-metal systems. This unique formula is recommended for chilled water and closed industrial cooling systems.It prevents deposits, scale, sludge and resultant loss in heat transfer and system efficiency.

Properties Suppliers
MCT 560

MCT 560 an all-organic inhibitor make-up that is designed to maintain corrosion protection in the recirculating cooling water systems.Residual scale and inorganic contaminants are also stabilized to minimize or prevent deposit formation that would reduce system efficiency.

Properties
Polydex

Polydex is a bacteriostatic algaecide for potable water sources, treatment and distribution systems providing long-term protection from algae, bacteria and their toxins.

Properties Suppliers
RO 1300

RO 1300 is an effective multi-purpose antifoulant that functions to maintain reverse osmosis membranes clean and free of deposit materials.It works as a dual function additive in that it prevents the formation of inorganic scale by effectively increasing the solubility of inorganic salts. It also prevents iron fouling of the membranes by holding soluble iron in solution and dispersing insoluble iron.It greatly improves membrane efficiency and reduces the potential for damage.

Properties Suppliers
RO 1301

RO 1301 is a polymeric antiscalant that inhibits inorganic scale formation on reverse osmosis membrane surfaces.It functions by chemically interfering with crystal formation in the feedwater and reduces the potential for adhesion between scale particles and the membrane surface. Typical mineral constituents such as calcium and magnesium carbonates, sulfates, and colloidal clay particles are maintained in a soluble state and dispersed to minimize or eliminate scale potential.It aids in prolonging membrane life and increases operational efficiency.

Properties Suppliers
RO 1302

RO 1302 is a heavy duty antiscalant/antifoulant treatment product for Reverse Osmosis membrane surfaces. It is composed of ingredients that prevent the formation of inorganic scales by effectively increasing the solubility of inorganic salts and by chelation. Many of these constituents include hardness scales and other inorganic contaminants such as barium, copper, iron, and strontium.It also controls insoluble particles, such as iron, and disperses these materials for removal through the reject water.

Properties Suppliers
RO 1304

RO 1304 is designed to inhibit silica, sulfate, and carbonate scales and disperse colloidal particles in membrane separation systems.It is unique in that it inhibits silica scaling at much higher concentrations than typical antiscalants, a feature which may allow significantly increased RO system recovery in high silica feedwaters.

Properties Suppliers
RP-165H

RP-165H is an non-toxic, biodegradable, highly effective rust retarding compound which is capable of floating on ballast water and will deposit itself as a protective coating on adjacent tank surfaces during ballasting and deballasting operations.

Properties Suppliers
SCALGUN

SCALGUN is an acidic composition containing organic inhibitors and surface active agents, suitable for use as a low cost general purpose descaling and derusting chemical specially for carbon steel or hot rolled steel & for cast iron parts.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X