Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals

chemical-categories

Ammonium Iron(III) Sulfate

Ammonium iron(III) sulfate is a double salt in the class of alums. It is a weak oxidizing agent, capable of being reduced to Mohr's salt, ferrous ammonium sulfate. It is used in waste water treatment, tanning, production of dyestuffs, and as an etching agent in the production of electronic components. It has been used in a wide area of applications, including adiabatic refrigeration equipment, biochemical analysis and organic synthesis.

Properties Suppliers
Anionic Polyacrylamide

Anionic Polyacrylamide product is used as coagulants and flocculants in various industrial waste water treatments plants. It can applied to beer industry, pharmaceutical industry,paper making industry, mining industry, oil drilling industry, textile printing and dyeing, chemical industry, food processing industry and oily based waste water treatment industry. Anionic Polyacrylamide is usually applied with inorganic additive in the primary treatment process to enhance the efficiency of flotation or precipitation.

Properties Suppliers
Antifoam SD

Antifoam SD is a milky white general purpose foam control additive.It is designed specifically for the control of foaming problems in aqueous systems.

Properties Suppliers
AquaTreat 9310

AquaTreat 9310 is a specially formulated product for use in steam raising plant. It is most suitable for large installation. AquaTreat-9310 provides rapid oxygen scavenging to minimize corrosion. It is normally dosed so as to maintain 30-70 mg/l sulphite reserves in the boiler water.AquaTreat-9310 will absorb oxygen from the atmosphere and therefore no more than one day supply should be available in an open dilution tank.

Properties Suppliers
AquaTreat 9450

AquaTreat 9450 is based on catalyzed sulphite, anti-precipitants, sludge conditioners, alkalinity builder and an organic multifunctional tannin based product. AquaTreat 9450 combines the functions of rapid oxygen scavenging, deposition control and alkalinity control in a single, stable product. AquaTreat 9450 should be dosed continuously into the feed.

Properties Suppliers
AquaTreat-8331

AquaTreat-8331 is a broad-spectrum non-oxidizing biocide for use in industrial cooling water systems. AquaTreat-8331 is based on quaternary ammonium compounds and is biodegradable at use levels. AquaTreat-8331 exhibits excellent control over a wide range of pH.AquaTreat-8331 can be directly fed from the container into the basin of the cooling water system or at any other point where good mixing can be ensured.In cooling water systems, AquaTreat-3331 is slowly hydrolyzed to non-toxic products.AquaTreat-8331 is packed in 50 litres HDPE carbouys/200 litres HDPE drums.

Properties Suppliers
AquaTreat-8540

AquaTreat-8540 is a unique blend of non-metallic and all organic inhibitors for the control of corrosion, scaling and fouling in open re-circulatory cooling water systems. The product contains organic scale and corrosion inhibitors blended with polyanionic dispersants. AquaTreat-8540 should be fed continuously to ensure that the recommended level of residual is maintained at all times.

Properties Suppliers
AquaTreat-9002

AquaTreat-9002 is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002 is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters. AquaTreat-9002 is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. AquaTreat-9002 may be injected using a dosage pump, dosage pot or directly into the feed tank (whichever is appropriate to the particular plant). AquaTreat-9002 Reduces acid corrosion, Stabilizes protective films, Provides alkalinity control, Reduces foaming.

Properties Suppliers
AquaTreat-9002-M

AquaTreat-9002-M is an alkalinity builder. It also contains organic dispersants and antifoam. AquaTreat-9002-M is used for imparting alkalinity to boiler water or for correcting the pH of low alkalinity waters. AquaTreat-9002-M is applied to maintain the boiler water alkalinity within limits to be established by WEX, to suit the operating conditions. AquaTreat-9002-M Reduces acid corrosion, Stabilizes protective films, Provides alkalinity control, Reduces foaming.

Properties Suppliers
AquaTreat-9065

AquaTreat-9065 is a specially designed dispersant for the prevention of scaling in boilers and in boiler feed lines. It causes calcium and magnesium hardness salts to form a light, mobile floc, easily removed by blow down. AquaTreat-9065 is normally used with asn oxygen scavenger and a phosphate. AquaTreat-9065 is normally maintained at concentrations between 100 and 500 mg/l, in the boiler water. AquaTreat-9065 is not corrosive to steel mixing tanks or dosage pumps, in concentrated or dilute form.

Properties Suppliers