Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals

chemical-categories

TwinOxide

TwinOxide is a unique and advanced delivery system, providing 99.9x% pure chlorine dioxide solution in a 0.3% concentration without by-products. It is applied as a (drinking) water disinfectant. TwinOxide is delivered as a powder kit of two components. Once added to a specific volume of water, TwinOxide reacts to a 99.9x% pure chlorine dioxide solution with a kinetic halftime as a biocide of 30 days. TwinOxide is easy to transport by road, sea and air. It is safe to handle and simple to apply, using standard available dosing equipment and without the use of a reactor. TwinOxide uses different chemical precursors than conventional methods for the generation of chlorine dioxide. TwinOxide does not generate by-products, is not explosive and has an indefinite shelf-life and remains active as a biocide far longer than chlorine. TwinOxide 0.3% solution can be transported without notable hazard or risk.

Properties Suppliers
VCHEM 101

VCHEM 101 is a sludge conditioner based on low molecular weight copolymer. It is designed to produce light finely divided particles which are non adherent and easily removed in blowdown. VCHEM 101 is highly stable and does not decompose under high pressure (100 Kg/Cm2) and temperature. VCHEM 101 is normally dosed so as to maintain the boiler water concentration between 100 to 500 mg/l in the boiler water. VCHEM 101 viscosity allows it to be dosed by conventional dosage pumps, without dilution, but it may be diluted if desired. VCHEM 101 is not corrosive in concentrated or diluted form to steel mixing tanks or dosage pumps.

Properties Suppliers
VCHEM 104

VCHEM 104 is a blend of organic and inorganic scale and corrosion inhibitor. VCHEM 104 is stable over a wide range of temperature and pH variation and provide scale and corrosion control over wide range of water qualities and operational condition.VCHEM 104 is dosed for a period of 5 days at the start of the treatment programme enabling a strong film to be build up quickly.

Properties Suppliers
VCHEM 105

VCHEM 105 acts immediately to maintain the alkalinity inside the cooling water system. Being a catalyzed pH booster, it removes acidity from boiler-feed water. VCHEM 105 has a catalyst, which effects de-oxygenation. It is applicable to cooling towers. VCHEM 105 is known to prevent corrosion and pitting in cooling tower circuit.

Properties Suppliers
VCHEM 106

VCHEM 106 combines with the cell wall and cytoplasmic membrane and after adsorption and infiltration of the cytoplasmic membrane forms colloidal solution with the cytoplasm and precipitates protein.

Properties Suppliers
VCHEM 110

VCHEM 110 is a combination of phosphates with polymeric organic compounds. It avoids crystallization of scale forming compounds. VCHEM 110 forms magnesium hydroxide and calcium phosphate with magnesium ions and calcium ions. It contains polymeric compounds the prevent foaming in the boiler drum.In order to maintain boiler free from scaling, the dosage of VCHEM-110 should be regular as per our recommendations and the residuals to be maintained in the range of 15-30 ppm in the boiler drum. VCHEM-110 is to be dosed by means of a dosing pump either to the Boiler Drum or to feed water tank.

Properties Suppliers
VCHEM 115

VCHEM 115 Oxygen Scavanger searches the dissolved oxygen from the boiler-feed water. It provides protection to the boiler. VCHEM 115 has a catalyst which effects de-oxygenation.

Properties Suppliers
VCHEM 120

VCHEM 120 PH Booster acts immediately to maintain the alkalinity inside the boiler-feed water.It has a catalyst which effects de-oxygenation.

Properties Suppliers
Acrylamide

Acrylamide is incompatible with acids, bases, oxidizing agents, iron, and iron salts. It decomposes non-thermally to form ammonia, and thermal decomposition produces carbon monoxide, carbon dioxide, and oxides of nitrogen. It is prepared on an industrial scale by the hydrolysis of acrylonitrile by nitrile hydratase. Most acrylamide is used to synthesize polyacrylamides, which find many uses as water-soluble thickeners. These include use in wastewater treatment, gel electrophoresis, papermaking, ore processing, and the manufacture of permanent press fabrics. Some acrylamide is used in the manufacture of dyes and the manufacture of other monomers.

Properties Suppliers
BLR46UNI-S

BLR46UNI-S is suitable for high and low pressure Boiler with condensate return line, prevents crevice corrosion and stress corrosion High heat transfer. BLR46UNI-S has the efficiency increase in productivity extended system life.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X