Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals



PAC-PW-10 is Used for the treatment of potable water and waste water.It is used for Phosphate removal.

Properties Suppliers

SUJAL-ASR is to control scale deposition and particulate fouling within membrane separation systems like reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF) and other supposed to be affected areas" is the main feature of Sujal-Asr.

Properties Suppliers
Tamol 850

Tamol 850 is a general purpose scale inhibitor and sludge dispersant. Very good thermal stability.

Properties Suppliers
Tamol 960

Tamol 960 is a general purpose scale inhibitor and sludge dispersant. Very good thermal stability

Properties Suppliers
Tandex 55

Tandex 55 is a powerful blend of wetting agents, dispersants and cleaners in a concentrated powdered form.It is designed to give high powered cleaning at very low concentrations.

Properties Suppliers

TwinOxide is a unique and advanced delivery system, providing 99.9x% pure chlorine dioxide solution in a 0.3% concentration without by-products. It is applied as a (drinking) water disinfectant. TwinOxide is delivered as a powder kit of two components. Once added to a specific volume of water, TwinOxide reacts to a 99.9x% pure chlorine dioxide solution with a kinetic halftime as a biocide of 30 days. TwinOxide is easy to transport by road, sea and air. It is safe to handle and simple to apply, using standard available dosing equipment and without the use of a reactor. TwinOxide uses different chemical precursors than conventional methods for the generation of chlorine dioxide. TwinOxide does not generate by-products, is not explosive and has an indefinite shelf-life and remains active as a biocide far longer than chlorine. TwinOxide 0.3% solution can be transported without notable hazard or risk.

Properties Suppliers

VCHEM 101 is a sludge conditioner based on low molecular weight copolymer. It is designed to produce light finely divided particles which are non adherent and easily removed in blowdown. VCHEM 101 is highly stable and does not decompose under high pressure (100 Kg/Cm2) and temperature. VCHEM 101 is normally dosed so as to maintain the boiler water concentration between 100 to 500 mg/l in the boiler water. VCHEM 101 viscosity allows it to be dosed by conventional dosage pumps, without dilution, but it may be diluted if desired. VCHEM 101 is not corrosive in concentrated or diluted form to steel mixing tanks or dosage pumps.

Properties Suppliers

VCHEM 104 is a blend of organic and inorganic scale and corrosion inhibitor. VCHEM 104 is stable over a wide range of temperature and pH variation and provide scale and corrosion control over wide range of water qualities and operational condition.VCHEM 104 is dosed for a period of 5 days at the start of the treatment programme enabling a strong film to be build up quickly.

Properties Suppliers

VCHEM 105 acts immediately to maintain the alkalinity inside the cooling water system. Being a catalyzed pH booster, it removes acidity from boiler-feed water. VCHEM 105 has a catalyst, which effects de-oxygenation. It is applicable to cooling towers. VCHEM 105 is known to prevent corrosion and pitting in cooling tower circuit.

Properties Suppliers uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X