Buy Water Treatment Chemicals | Biocides | Coagulant | Oxygen Scavengers | Boiler Chemicals - WorldOfChemicals

chemical-categories

RUSTOKEM-D2

RUSTOKEM-D2 is sulphanic acid based Inhibited Acidic Powder with inhibitor is used for removal of water scale deposit in heat transfer equipments. RUSTOKEM-D2 gives uniform & total protection,does not stain metal surfaces and completely miscible with water and acids.

Properties Suppliers
SUJAL-ASP-2

SUJAL-ASP-2 is used to control scale deposition and particulate fouling within membrane separation systems like reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF) and other supposed to be affected areas" is the main feature of Sujal-Asp-2. It is the product containing organic polymers and corrosion inhibitor.

Properties Suppliers
Swemcare HP

Swemcare HP is a highly cost effective green chemistry scale inhibitor with a super-threshold agent able to stabilize a wild range of supersaturated salt solution thereby preventing precipitation on the membrane surface. Swemcare HP Typically, a dose of 2 to 3 ppm Feed water quantity. It is suggested to run Swemcare dosage selection software on regular basis for optimized dosage of chemicals.

Properties Suppliers
Swemcare MP

Swemcare MP is developed specifically for use with high silica and iron waters and is a synergistic blend of threshold antiscalants and dispersants designed to reduce precipitation of scale premature membrane failure of membranes system. Swemcare MP is compatible with vinyl, polyethylene, PVC, Hypalon, Viton, Teflon, polypropylene, HDCL and BPDM, Brass, steel, 304 stainless steel, 316 stainless steel, neoprene, Buna-N and polyurethane.

Properties Suppliers
Swemcare SP

Swemcare SP is developed specifically for use with high fluoride containing water and is asynergistic blend of threshold antiscaliants and dispersants designed to reduce precipitation of scale premature membrane failure of membranes systems SW 416 is designed to handle up to 5.0mg/l of CaF at pH 7.5.

Properties Suppliers
UltraFloc C

UltraFloc C is used for flocculation, Sludge dewatering / thickening, floatation, clarification and decantation.

Properties Suppliers
UltraPure C

UltraPure C is used in water softening, de-alkalization, deionization and chemical processing applications, for both separate and mixed bed ion exchange plants.

Properties Suppliers
ACUCOOL 2301

ACUCOOL 2301 is a high performance non-ionic surface active agent biodispersant with additional antifoam scientifically formulated for the treatment of cooling water systems including re-circulating and once-through cooling systems. ACUCOOL 2301 improves the performance of cooling systems, where fouling by microbiological slimes is reducing efficiency, by removing and dispersing the deposits. ACUCOOL 2301 is particularly effective when used in conjunction with chlorine and or bromine based biocides and is ideally suited to be dosed with sodium hypochlorite for cooling tower cleaning and disinfection procedures and legionella control activities.ACUCOOL 2301 is effective in both re-circulating and once-through cooling systems.

Properties Suppliers

www.worldofchemicals.com uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X